pol
Wiki Editors
Posts: 1,349
|
Post by pol on Oct 5, 2021 19:58:18 GMT
My latest order from TW, only little but 2 more modules (and always add some patch leads... Loving the new boxes! .  |
|
|
|
Post by lukylutte on Oct 17, 2021 11:27:07 GMT
|
|
|
|
Post by duddex on Oct 23, 2021 8:23:30 GMT
My order arrived and I am quite happy with it so far:  I wanted to be able to connect and mix my existing Behringer modules with the AE modules. And: yes, I know... Behringer is a bit controversial. I have added a small drum section and a DYI section (which I am particularly excited about). One thing I noticed is that the volume of the DRUMKIT 010 is quite low compared to the other modules. I found out, that this topic has already been addresses in this forumI am going to play with some GRAINS firmware modules now and I will let you know how that works out for me  |
|
|
|
Post by duddex on Oct 23, 2021 8:48:37 GMT
I forgot to mention the "synth section" with 2OSC/d, 2ENV, 2VCA. And I am using a laptop stand for easier access:   |
|
pol
Wiki Editors
Posts: 1,349
|
Post by pol on Oct 23, 2021 21:23:04 GMT
I wanted to be able to connect and mix my existing Behringer modules with the AE modules. And: yes, I know... Behringer is a bit controversial. This is one of the few electronic music forums where you can just discuss using Behringer stuff. Quite a few forum members have the Neutron which works well with the AE,  |
|
|
|
Post by pt3r on Oct 24, 2021 9:02:33 GMT
Yes I do own a neutron but I still think they're a company with a questionable business model to say the least. I prefer AE any day over the neutron since it really helped me to wrap my head around the modular synthesis. Neutron with its prepatched setup and patchbay on the side was too confusing, not intuitive, you can't read the patch like on a real modular.
|
|
|
|
Post by chillja on Nov 24, 2021 19:43:29 GMT
Æ spaceship already landed  just begun scratching it's surface  and made some test recordings. All in all very happy with it and so far. Only one small problem i will post about in appropriate thread. Patch cables smell goood   |
|
|
|
Post by tIB on Nov 25, 2021 12:54:31 GMT
Pride of place...  |
|
namke
wonkystuff
electronics and sound, what's not to like?!
Posts: 686
|
Post by namke on Nov 25, 2021 13:53:00 GMT
(Big heart emoji)  |
|
|
|
Post by rockysmalls on Nov 25, 2021 18:08:55 GMT
(Big heart emoji) <button disabled="" class="c-attachment-insert--linked o-btn--sm">Attachment Deleted</button> ooh! and you are 58 miles north of me.. mine has escaped Heathrow and en route so i am hoping to see it tomorrow... was there any vat/surcharge to pay or did it get through like the Tangible stuff? |
|
namke
wonkystuff
electronics and sound, what's not to like?!
Posts: 686
|
Post by namke on Nov 25, 2021 18:25:59 GMT
(Big heart emoji) <button disabled="" class="c-attachment-insert--linked o-btn--sm">Attachment Deleted</button> ooh! and you are 58 miles north of me.. mine has escaped Heathrow and en route so i am hoping to see it tomorrow... was there any vat/surcharge to pay or did it get through like the Tangible stuff? Nothing extra to pay — just a pleasant chat with the postie 😁 |
|
|
|
Post by maydonpoliris on Nov 26, 2021 23:58:47 GMT
lots of people posting cool new toys at the moment so here's mine with a massive shout out to minimodular.com.au for, at short notice, organising my weekend activities......  |
|
namke
wonkystuff
electronics and sound, what's not to like?!
Posts: 686
|
Post by namke on Nov 27, 2021 20:41:22 GMT
A new home for the Euclid Grid (and others!) — from Juno  |
|
|
|
Post by reductionist_earth_catalog on Dec 5, 2021 5:57:09 GMT
Just powered on the used system I bought (so not really new stuff, but new-to-me)! Tons of fun. Already got a few modules and more patchwires inbound from Noisebug, and already planning out my next 2x16 case haha. My plan is to decide which signal sources I like the most and remove the rest, making more room for effects, modulation sources and control surfaces. I can't wait for the heartbeat clock module, not to mention a more-flexible MIDI module that I've seen some rumors about. I'd love to build an ISD module for some lo-fi sampling. I'm migrating over from Eurorack, and I can't wait to actually be able to afford a modular system that I can build entire tracks on.  |
|
|
|
Post by keurslagerkurt on Dec 5, 2021 8:22:14 GMT
Welcome reductionist_earth_catalog ! Glad to have you here, looks like a fun system 😃 Don't know if you've seen it, but i had a go at incorporating the ISD1820 into AE Modular some time ago: forum.aemodular.com/thread/1168/small-microphone-recorder-playback-moduleWas really easy to connect, of course very Lo-fi but a lot of fun. Another AE user made a very nice version with a frontpanel and a 3D printer Mic holder even. Honestly i should revisit the chip and try to make a small DIY kit for it, i even ordered 20 ISD's which i still have.. 🤔 |
|
|
|
Post by lukylutte on Dec 5, 2021 10:57:35 GMT
Honestly i should revisit the chip and try to make a small DIY kit for it, i even ordered 20 ISD's which i still have.. 🤔 Please do✌️😁 |
|
pol
Wiki Editors
Posts: 1,349
|
Post by pol on Dec 5, 2021 21:42:42 GMT
Just powered on the used system I bought (so not really new stuff, but new-to-me)! Tons of fun. Already got a few modules and more patchwires inbound from Noisebug, and already planning out my next 2x16 case haha. My plan is to decide which signal sources I like the most and remove the rest, making more room for effects, modulation sources and control surfaces. I can't wait for the heartbeat clock module, not to mention a more-flexible MIDI module that I've seen some rumors about. I'd love to build an ISD module for some lo-fi sampling. I'm migrating over from Eurorack, and I can't wait to actually be able to afford a modular system that I can build entire tracks on. <button disabled="" class="c-attachment-insert--linked o-btn--sm">Attachment Deleted</button> Approve of having the spring reverb in there already, with open spring so you can hit them as well! |
|
|
|
Post by pt3r on Dec 5, 2021 21:51:05 GMT
Always approach those springs with caution though, they're not that sturdy and if they break then you basically have to buy a new reverb tank.
|
|
|
|
Post by reductionist_earth_catalog on Dec 6, 2021 5:45:06 GMT
Always approach those springs with caution though, they're not that sturdy and if they break then you basically have to buy a new reverb tank. Oh most definitely. A tiny little tap goes a long way anyways! |
|
|
|
Post by maydonpoliris on Dec 8, 2021 9:00:56 GMT
oh mr/s postperson....... are Euclidding me! Its been raining all day and this could have cirrussly been a lot worse (as you could have brought me a korg keytar....... )  I think if Kurt's modules arrived today too I would have been struck by lightening for sure.  |
|
|
|
Post by lukylutte on Dec 9, 2021 17:59:16 GMT
Little experimental case to try the freshly arrived modules before moving them into the monster case. 🥳 Just needs to scratch a bit the five step as it's not fitting in the case but no biggy 😜 http://instagram.com/p/CXRXLwIqjKu |
|
|
|
Post by pt3r on Dec 9, 2021 18:36:05 GMT
Little experimental case to try the freshly arrived modules before moving them into the monster case. 🥳 Just needs to scratch a bit the five step as it's not fitting in the case but no biggy 😜 http://instagr.am/p/CXRXLwIqjKu something went wrong in your post. |
|
|
|
Post by lukylutte on Dec 9, 2021 19:45:40 GMT
something went wrong in your post. What? |
|
pol
Wiki Editors
Posts: 1,349
|
Post by pol on Dec 9, 2021 19:49:23 GMT
oh mr/s postperson....... are Euclidding me! Its been raining all day and this could have cirrussly been a lot worse (as you could have brought me a korg keytar....... ) <button disabled="" class="c-attachment-insert--linked o-btn--sm">Attachment Deleted</button> I think if Kurt's modules arrived today too I would have been struck by lightening for sure. <button disabled="" class="c-attachment-insert--linked o-btn--sm">Attachment Deleted</button> Great, I'm sure it's been worth the wait! |
|
|
|
Post by pt3r on Dec 9, 2021 19:50:41 GMT
something went wrong in your post. What? The fact that no picture is shown? |
|
just begun scratching it's surface 
and made some test recordings. All in all very happy with it and so far. Only one small problem i will post about in appropriate thread. Patch cables smell goood 
