|
|
Post by jedisynthor on Nov 11, 2020 21:49:35 GMT
I did another session with the drum kit today.
I probably received one of the first batches. The kit seems very quiet to me when I run other modules in parallel. Is this a known bug?
BR Jedi
|
|
|
|
Post by admin on Nov 11, 2020 21:55:15 GMT
Yes, I have one of those, too and I run it through the 2SIGNALAMP to boost the signal.
|
|
|
|
Post by jedisynthor on Nov 11, 2020 22:04:32 GMT
Ok, this is a way to bypass the problem. I also have the module.
Is there a hardware Fix possible?
Br Jedi
|
|
|
|
Post by 101 on Nov 11, 2020 22:21:02 GMT
If you haven't got the 2SIGNALAMP module, a quick and dirty method I used to use to boost its volume is to feed the DRUMKIT 010 output into a VCA input. Then that VCA out to a mixer input.
Use the 5v pinout from the master module into the VCA CV input to keep the VCA permanently open. That way you can amplify it and vary the volume using the VCA CV knob.
|
|
|
|
Post by jedisynthor on Nov 12, 2020 6:08:59 GMT
Thanks for the answer. I have all of the modules and it works.
nevertheless a permanent solution without additinal patches would be great as the kick modul (which often is used in combination) don't need it.
BR Jedi
|
|
