|
|
2Auto
Oct 14, 2022 19:51:32 GMT
Kyaa likes this
Post by maydonpoliris on Oct 14, 2022 19:51:32 GMT
It's landed safely on my shores this week. Hope the others arrive soon without having to trace or replace.
|
|
|
|
2Auto
Oct 15, 2022 0:00:42 GMT
Post by Kyaa on Oct 15, 2022 0:00:42 GMT
It's landed safely on my shores this week. Hope the others arrive soon without having to trace or replace. Woohoo! Glad to hear. Curious what you'll think of it! |
|
|
|
2Auto
Oct 15, 2022 6:57:39 GMT
Post by maydonpoliris on Oct 15, 2022 6:57:39 GMT
It's landed safely on my shores this week. Hope the others arrive soon without having to trace or replace. Woohoo! Glad to hear. Curious what you'll think of it! thanks for making it Kyaa looks like a solid build and am looking forward to plugging it in. I'm sure I'll love it but will let you know how I go. |
|
|
|
Post by pt3r on Oct 15, 2022 8:16:31 GMT
I am so sorry to hear about all these shipment issues/delays because I have always been very interested in these modules but the whole import taxes/tracing business of BPOST has always made me postpone put of ordering modules from abroad, and since the whole b**x*t b*ll**ks the same is happening with the wonkystuff modules which is a crying shame because you guys (seem to) make excellent modules and deserve all the support you can get.  I guess I'll just have to bite the bullet. |
|
pol
Wiki Editors
Posts: 1,083
|
Post by pol on Oct 17, 2022 18:45:12 GMT
Mine finally arrived, took nearly 5 weeks as opposed to 3 weeks for the Euclid Grid. All I can say is well worth the wait, does exactly what I hoped and so easily - another cracker of a module Kyaa Well done. tried using it to module the wavetables wave mod, PWM and anything on the Kuzmin, great fun,  |
|
pol
Wiki Editors
Posts: 1,083
|
2Auto
Oct 17, 2022 18:46:19 GMT
pt3r likes this
Post by pol on Oct 17, 2022 18:46:19 GMT
I am so sorry to hear about all these shipment issues/delays because I have always been very interested in these modules but the whole import taxes/tracing business of BPOST has always made me postpone put of ordering modules from abroad, and since the whole b**x*t b*ll**ks the same is happening with the wonkystuff modules which is a crying shame because you guys (seem to) make excellent modules and deserve all the support you can get. I guess I'll just have to bite the bullet. Yes, get chewing, we in the UK have that risk every time we order from Tangible Waves and it gets here eventually! |
|
|
|
Post by Kyaa on Oct 17, 2022 19:37:23 GMT
Mine finally arrived, took nearly 5 weeks as opposed to 3 weeks for the Euclid Grid. All I can say is well worth the wait, does exactly what I hoped and so easily - another cracker of a module Kyaa Well done. tried using it to module the wavetables wave mod, PWM and anything on the Kuzmin, great fun, Woohoo! Glad you're enjoying it! Filters are an obvious choice, but I've also had a lot of fun using it as a pitch CV and writing riffs that way (Quantizer can help). |
|
|
|
2Auto
Oct 18, 2022 10:00:36 GMT
pol likes this
Post by maydonpoliris on Oct 18, 2022 10:00:36 GMT
I've just plugged it in for a test and used it to modulate the cv on the mixconsole works great but that pitch cv riff writing is a great tip! cheers Kyaa! |
|
|
|
Post by Kyaa on Oct 18, 2022 17:16:43 GMT
Speaking of, another fun thing to do w/ Mixconsole is to pan one channel hard left, and one hard right, and use 2Auto plus some attenuverting magic to set up an auto panner.
|
|
pol
Wiki Editors
Posts: 1,083
|
2Auto
Oct 19, 2022 19:48:30 GMT
Post by pol on Oct 19, 2022 19:48:30 GMT
Speaking of, another fun thing to do w/ Mixconsole is to pan one channel hard left, and one hard right, and use 2Auto plus some attenuverting magic to set up an auto panner. I'll try to work on the 2Auto Wiki page this weekend, some patch suggestions to add! |
|
|
|
Post by tIB on Oct 21, 2022 15:54:56 GMT
 Look what the dog dragged in!!! |
|
|
|
2Auto
Oct 21, 2022 18:04:23 GMT
pol likes this
Post by rockysmalls on Oct 21, 2022 18:04:23 GMT
Speaking of, another fun thing to do w/ Mixconsole is to pan one channel hard left, and one hard right, and use 2Auto plus some attenuverting magic to set up an auto panner. Toms, is there a way to erase the loop once recorded? is it just a question of briefly touching the knob without moving it? |
|
|
|
Post by Kyaa on Oct 21, 2022 20:05:00 GMT
Speaking of, another fun thing to do w/ Mixconsole is to pan one channel hard left, and one hard right, and use 2Auto plus some attenuverting magic to set up an auto panner. Toms, is there a way to erase the loop once recorded? is it just a question of briefly touching the knob without moving it? Yep, that's how I do it. |
|
|
|
Post by Kyaa on Oct 25, 2022 21:47:42 GMT
So, I've managed to fulfill all of the pre-orders! I've added a product page to my webstore here: kyaa.co/product/2autoIf you're interested in picking one up in a subsequent batch, feel free to sign up for notifications on that page. I'll hopefully have some time to throw together a manual soon. |
|
pol
Wiki Editors
Posts: 1,083
|
Post by pol on Oct 29, 2022 10:20:31 GMT
So, I've managed to fulfill all of the pre-orders! I've added a product page to my webstore here: kyaa.co/product/2autoIf you're interested in picking one up in a subsequent batch, feel free to sign up for notifications on that page. I'll hopefully have some time to throw together a manual soon. If you need a hand let me know. Also, I've had a go a the Wiki page so you could give it the once over and let me know if anything is wrong. The main question was how long a recording you could have - I thought I'd seen 2 seconds somewhere but can't find it now. The other was exactly what the sync switch does, I've had a stab at it..... 
Thanks, Pol.
|
|
|
|
Post by rockysmalls on Oct 29, 2022 12:08:35 GMT
So, I've managed to fulfill all of the pre-orders! I've added a product page to my webstore here: kyaa.co/product/2autoIf you're interested in picking one up in a subsequent batch, feel free to sign up for notifications on that page. I'll hopefully have some time to throw together a manual soon. If you need a hand let me know. Also, I've had a go a the Wiki page so you could give it the once over and let me know if anything is wrong. The main question was how long a recording you could have - I thought I'd seen 2 seconds somewhere but can't find it now. The other was exactly what the sync switch does, I've had a stab at it.....
Thanks, Pol.
excellent! i suppose the two obvious things to mention are that it's a 30 second loop/envelope BUT you can record for longer ie: 1min, 2min, 4min, as it halves the resolution to accomodate the lengths so 4 mins won't exhibit any of the smoothness of 30secs.. second is that the trig A & B outs are not necessarily repeating the trig ins UNLESS there actually is one coming in, they automatically send out a trigger at the beginning of every loop regardless of sync setting.. which is nice :] rockysmalls Avatar May 19, 2022 at 5:04pm rockysmalls said: could you give details about how you extend the 30 seconds via lower resolution? KYAA: The base sampling frequency is ~60hz. There's enough ram allocated for 30 seconds at that rate. If the recording continues beyond that, the sampling freq will be halved (30hz, 15hz, etc...), and the max length will double (1min, 2min, etc...). The reduced fidelity should be sufficient for longer ambient type stuff. |
|
pol
Wiki Editors
Posts: 1,083
|
Post by pol on Oct 29, 2022 14:47:42 GMT
If you need a hand let me know. Also, I've had a go a the Wiki page so you could give it the once over and let me know if anything is wrong. The main question was how long a recording you could have - I thought I'd seen 2 seconds somewhere but can't find it now. The other was exactly what the sync switch does, I've had a stab at it.....
Thanks, Pol.
excellent! i suppose the two obvious things to mention are that it's a 30 second loop/envelope BUT you can record for longer ie: 1min, 2min, 4min, as it halves the resolution to accomodate the lengths so 4 mins won't exhibit any of the smoothness of 30secs.. second is that the trig A & B outs are not necessarily repeating the trig ins UNLESS there actually is one coming in, they automatically send out a trigger at the beginning of every loop regardless of sync setting.. which is nice :] rockysmalls Avatar May 19, 2022 at 5:04pm rockysmalls said: could you give details about how you extend the 30 seconds via lower resolution? KYAA: The base sampling frequency is ~60hz. There's enough ram allocated for 30 seconds at that rate. If the recording continues beyond that, the sampling freq will be halved (30hz, 15hz, etc...), and the max length will double (1min, 2min, etc...). The reduced fidelity should be sufficient for longer ambient type stuff. Page updated, thanks |
|
|
|
2Auto
Oct 29, 2022 17:47:38 GMT
Post by Kyaa on Oct 29, 2022 17:47:38 GMT
excellent! i suppose the two obvious things to mention are that it's a 30 second loop/envelope BUT you can record for longer ie: 1min, 2min, 4min, as it halves the resolution to accomodate the lengths so 4 mins won't exhibit any of the smoothness of 30secs.. second is that the trig A & B outs are not necessarily repeating the trig ins UNLESS there actually is one coming in, they automatically send out a trigger at the beginning of every loop regardless of sync setting.. which is nice :] Mostly correct, though I never was able to get the recording resolution code done, so the max length is currently fixed at 30 seconds. 😅 The trigger output is sent at the end of any cycle (loop or env), so not strictly linked to the input trigger. |
|
|
|
2Auto
Oct 29, 2022 17:50:05 GMT
Post by Kyaa on Oct 29, 2022 17:50:05 GMT
If you need a hand let me know. Also, I've had a go a the Wiki page so you could give it the once over and let me know if anything is wrong. The main question was how long a recording you could have - I thought I'd seen 2 seconds somewhere but can't find it now. The other was exactly what the sync switch does, I've had a stab at it..... Thanks, Pol. The sync switch just selects where the external clock should be taken from, the frontpanel input, or the bus clk. I think if I do another run I may just have that happen automagically though. |
|
|
|
2Auto
Oct 29, 2022 17:57:28 GMT
Post by Kyaa on Oct 29, 2022 17:57:28 GMT
I wouldn't mind helping contribute to the manual if admin wants to set up that account for me. 😁 |
|
pol
Wiki Editors
Posts: 1,083
|
2Auto
Oct 29, 2022 18:47:20 GMT
Post by pol on Oct 29, 2022 18:47:20 GMT
If you need a hand let me know. Also, I've had a go a the Wiki page so you could give it the once over and let me know if anything is wrong. The main question was how long a recording you could have - I thought I'd seen 2 seconds somewhere but can't find it now. The other was exactly what the sync switch does, I've had a stab at it..... Thanks, Pol. The sync switch just selects where the external clock should be taken from, the frontpanel input, or the bus clk. I think if I do another run I may just have that happen automagically though. Cool, that's what I thought as hadn't actually tried it with my module. Correct on the Wiki then! |
|
|
|
2Auto
Oct 30, 2022 13:54:04 GMT
Post by rockysmalls on Oct 30, 2022 13:54:04 GMT
If you need a hand let me know. Also, I've had a go a the Wiki page so you could give it the once over and let me know if anything is wrong. The main question was how long a recording you could have - I thought I'd seen 2 seconds somewhere but can't find it now. The other was exactly what the sync switch does, I've had a stab at it..... Thanks, Pol. The sync switch just selects where the external clock should be taken from, the frontpanel input, or the bus clk. I think if I do another run I may just have that happen automagically though. aha! i was thinking that it was just me versus the sensitivity of the knobs ,, and that keeping proper finger contact for more than 30 secs was near impossible!! is there easy ( home diy ) ways to update the firmware in the module , in case you manage to crack that problem and give us longer loops... or is it a no go? ( meant as reply to yr previous post on cv loop length ) |
|
|
|
Post by Kyaa on Oct 31, 2022 22:13:14 GMT
The sync switch just selects where the external clock should be taken from, the frontpanel input, or the bus clk. I think if I do another run I may just have that happen automagically though. aha! i was thinking that it was just me versus the sensitivity of the knobs ,, and that keeping proper finger contact for more than 30 secs was near impossible!! is there easy ( home diy ) ways to update the firmware in the module , in case you manage to crack that problem and give us longer loops... or is it a no go? ( meant as reply to yr previous post on cv loop length ) It would be easy enough for me to make a (relatively) cheap code uploading dongle to distribute for firmware updates. The real issue is me having any free-time to work on these little improvements. The current version is the 20% effort that covers 80% of peoples use cases. In my own testing, I never found it terribly useful to record any longer than that, so that feature inevitably made it's way to the backburner. 😅 I wish I could just work on these modules full time, haha. |
|
|
|
2Auto
Oct 31, 2022 22:41:21 GMT
tIB likes this
Post by Kyaa on Oct 31, 2022 22:41:21 GMT
Oh! Nice. Just realized insurance not needed! 😌 |
|
|
|
2Auto
Oct 31, 2022 22:45:09 GMT
Post by rockysmalls on Oct 31, 2022 22:45:09 GMT
aha! i was thinking that it was just me versus the sensitivity of the knobs ,, and that keeping proper finger contact for more than 30 secs was near impossible!! is there easy ( home diy ) ways to update the firmware in the module , in case you manage to crack that problem and give us longer loops... or is it a no go? ( meant as reply to yr previous post on cv loop length ) It would be easy enough for me to make a (relatively) cheap code uploading dongle to distribute for firmware updates. The real issue is me having any free-time to work on these little improvements. The current version is the 20% effort that covers 80% of peoples use cases. In my own testing, I never found it terribly useful to record any longer than that, so that feature inevitably made it's way to the backburner. 😅 I wish I could just work on these modules full time, haha. “I wish I could just work on these modules full time, haha.” i sincerely wish that for you too  .. very excited about the upcoming module , reading up on it on the github now... 30 secs isn’t too shoddy a length of automation. i’m not promising NOT to bring up the subject again though  ... kato style! 🙂 as you say there is ‘chaining’ and i’ve just realized that can be looped (?) |
|
I guess I'll just have to bite the bullet.
.. very excited about the upcoming module , reading up on it on the github now... 
... kato style! 🙂