|
|
2Auto
May 19, 2022 13:51:56 GMT
pol likes this
Post by Kyaa on May 19, 2022 13:51:56 GMT
Wow so recording begins based on touch, not movement? I honestly didn't even know touch-sensitive pots were a thing! I was inspired by some of my Novation gear. It's the same circuitry as capacitive touch-pads, but if you tune the sensitivity high enough the 'touch' can even be detected through the plastic knob caps. |
|
|
|
Post by Kyaa on May 19, 2022 13:53:13 GMT
Yeah maybe this idea already exists in the depths of eurorack but it's not a concept i've encountered before. Really interesting idea which would add a lot of playability to people's racks. Not to my knowledge, no. It's something I've always wanted, even when I was into eurorack DIY. I may have to consider making it available as a eurorack module as well... hmmm... 🤔 AE will always be the priority though. 😉 |
|
|
|
Post by rockysmalls on May 19, 2022 16:04:26 GMT
ooh! EOC daisy chaining :]
could you give details about how you extend the 30 seconds via lower resolution?
i'm crossing everything that the chips arrive sooner in the schedule.
|
|
|
|
2Auto
May 19, 2022 17:53:30 GMT
pol likes this
Post by Kyaa on May 19, 2022 17:53:30 GMT
could you give details about how you extend the 30 seconds via lower resolution? The base sampling frequency is ~60hz. There's enough ram allocated for 30 seconds at that rate. If the recording continues beyond that, the sampling freq will be halved (30hz, 15hz, etc...), and the max length will double (1min, 2min, etc...). The reduced fidelity should be sufficient for longer ambient type stuff. i'm crossing everything that the chips arrive sooner in the schedule. I'd unfortunately imagine later is more likely. 😔 The chips _are_ currently available, just at a hiked price. I have them on backorder for $1.65 a pop, but could get them today for $11.50 each. If people don't want to wait and are willing to pay $10 more or so, I could theoretically get them out sooner. I do still have a few more code and hardware changes to make though, would take me a little bit of time to iron out. |
|
|
|
2Auto
May 19, 2022 19:01:10 GMT
via mobile
Post by tIB on May 19, 2022 19:01:10 GMT
$10 more you say... $10 more than what? (ballpark)
|
|
|
|
Post by Kyaa on May 19, 2022 19:25:12 GMT
$10 more you say... $10 more than what? (ballpark) Err... nothing is finalized yet but I'd imagine $60 normal, and $70 with the quarantine chips. |
|
|
|
Post by Kyaa on May 19, 2022 19:30:58 GMT
I'm starting to think y'all should be the ones coming up with the module designs. 😅 I legit might. I'm sort of planning a sequencer to try and build once my system arrives. Also, yeeessss, do it! Pretty much any of the module makers (myself included) would be willing to help out to if you have any questions. |
|
|
|
2Auto
May 19, 2022 20:22:16 GMT
via mobile
Kyaa likes this
Post by tIB on May 19, 2022 20:22:16 GMT
$10 more you say... $10 more than what? (ballpark) Err... nothing is finalized yet but I'd imagine $60 normal, and $70 with the quarantine chips. Well add me to the list of big-shots who would be happy to pay extra! |
|
blake
New Member
Posts: 17
|
2Auto
May 20, 2022 7:03:59 GMT
Post by blake on May 20, 2022 7:03:59 GMT
Err... nothing is finalized yet but I'd imagine $60 normal, and $70 with the quarantine chips. Well add me to the list of big-shots who would be happy to pay extra! You can add me to that list as well. |
|
|
|
2Auto
May 20, 2022 8:44:05 GMT
Post by maydonpoliris on May 20, 2022 8:44:05 GMT
same! still a reasonable price.
|
|
pol
Wiki Editors
Posts: 1,082
|
2Auto
May 20, 2022 13:36:32 GMT
Kyaa likes this
Post by pol on May 20, 2022 13:36:32 GMT
The classic module you did know you needed until someone invented it, I so want one!
|
|
|
|
Post by Kyaa on May 20, 2022 13:47:09 GMT
Sounds like I could probably do an initial run of 5 to 10 units then. 🙂
|
|
jota
Junior Member
Posts: 60
|
2Auto
May 20, 2022 14:17:38 GMT
Post by jota on May 20, 2022 14:17:38 GMT
well, better go for ten then! (and count me in, pls)
|
|
|
|
2Auto
May 21, 2022 10:48:48 GMT
pol likes this
Post by rockysmalls on May 21, 2022 10:48:48 GMT
certainly , an extra $10 is aok... even with the pound being so low right now.. thanks for the info on the sampling rate.. sounds great  |
|
pol
Wiki Editors
Posts: 1,082
|
Post by pol on May 21, 2022 11:18:44 GMT
Sounds like I could probably do an initial run of 5 to 10 units then. 🙂 better add a Zero! (not the WW2 fighter)..... |
|
|
|
2Auto
May 23, 2022 10:06:13 GMT
Kyaa likes this
Post by keurslagerkurt on May 23, 2022 10:06:13 GMT
Wow so recording begins based on touch, not movement? I honestly didn't even know touch-sensitive pots were a thing! I didn't know either, and tbh its really some amazing hack-y work by the master Kyaa. I tried it at Superbooth, and its insane how good it works, really the smallest touch starts recording it, and yet it does never trigger randomly! |
|
|
|
Post by keurslagerkurt on May 23, 2022 10:09:18 GMT
Sounds like I could probably do an initial run of 5 to 10 units then. 🙂 I'd like to be on that list as well!  Maybe it's worth setting up some pre-order type page that's open for a limited time. I'm fine with paying in advance, because if the chips get so expensive the cash you have to invest can get painful.. |
|
|
|
Post by rockysmalls on May 23, 2022 10:47:14 GMT
Sounds like I could probably do an initial run of 5 to 10 units then. 🙂 I'd like to be on that list as well!  Maybe it's worth setting up some pre-order type page that's open for a limited time. I'm fine with paying in advance, because if the chips get so expensive the cash you have to invest can get painful.. yes,, special “chip” deposit , or just prepayment seems like a good idea.. |
|
|
|
Post by Kyaa on May 23, 2022 16:59:24 GMT
I'd like to be on that list as well! Maybe it's worth setting up some pre-order type page that's open for a limited time. I'm fine with paying in advance, because if the chips get so expensive the cash you have to invest can get painful.. yes,, special “chip” deposit , or just prepayment seems like a good idea.. I like this. The chips are available through my SMT assembler, so I'd actually be able to reserve the chips at the current price. I'll make a listing on my site and report back. |
|
S&E
Full Member
Posts: 115
|
2Auto
May 27, 2022 2:25:50 GMT
via mobile
Post by S&E on May 27, 2022 2:25:50 GMT
Wow, this sounds cool and useful. If I’m understanding the concept correctly, it reminds of the Yamaha “free EG” that they had on the DX200. You could draw an extended kind of free form env generator.
I definitely need a few of these. But I’m willing to wait for the full scale production with everything rock solid and tiptop (and a bit cheaper). Keep up the good work :-)
|
|
|
|
2Auto
May 28, 2022 1:56:25 GMT
Post by Kyaa on May 28, 2022 1:56:25 GMT
Wow, this sounds cool and useful. If I’m understanding the concept correctly, it reminds of the Yamaha “free EG” that they had on the DX200. You could draw an extended kind of free form env generator. I definitely need a few of these. But I’m willing to wait for the full scale production with everything rock solid and tiptop (and a bit cheaper). Keep up the good work :-) Had to look it up, but yes looks quite similar in principle. 🙂 |
|
|
|
Post by Kyaa on May 28, 2022 1:57:08 GMT
I'd like to be on that list as well! Maybe it's worth setting up some pre-order type page that's open for a limited time. I'm fine with paying in advance, because if the chips get so expensive the cash you have to invest can get painful.. yes,, special “chip” deposit , or just prepayment seems like a good idea.. Well, here ya go. kyaa.co/product/2auto-atmega4809-pre-order😉 |
|
|
|
Post by rockysmalls on May 28, 2022 7:03:58 GMT
deposit deposited... fingers crossed all the other components stay stable |
|
|
|
2Auto
May 28, 2022 13:40:22 GMT
via mobile
pol and Kyaa like this
Post by lukylutte on May 28, 2022 13:40:22 GMT
Yep, hopefully don't have to do this for each component 🤪
|
|
pol
Wiki Editors
Posts: 1,082
|
Post by pol on May 29, 2022 10:00:45 GMT
Done my preorder, roll on the summer!
|
|
