|
|
Post by rummelfigge on Sept 13, 2020 23:08:25 GMT
Hello,
I'm a newcomer and have two questions:
1. Where can I find the joint kit in the shop to connect two cases?
2. Where can I find some information on the various module revisions (differences, improvements, etc.)
Greetings and thanks
Rummelfigge
|
|
|
|
Post by MikMo on Sept 14, 2020 5:38:40 GMT
|
|
|
|
Post by admin on Sept 14, 2020 5:56:34 GMT
2. Where can I find some information on the various module revisions (differences, improvements, etc.) Greetings and thanks Rummelfigge Hi, I don't think we have the different revisions documented anywhere. Why are you interested in this? I can probably answer most questions if you want info on a specific module. |
|
|
|
Post by rockysmalls on Sept 14, 2020 10:49:57 GMT
2. Where can I find some information on the various module revisions (differences, improvements, etc.) Greetings and thanks Rummelfigge Hi, I don't think we have the different revisions documented anywhere. Why are you interested in this? Probably I can probably answer most questions if you want info on a specific module. there’s an important one that i only learnt the other day from Robert... probably in a thread on here somewhere. I nearly ordered a replacement Wasp Filter “vactrol style” ... before robert told me that it’s just a new faceplate print to highlight the fact that it IS vactrol based ... there is no difference from the original kickstarter module, that’s vactrol too. phew! saved me a few euros that did. |
|
|
|
Post by admin on Sept 14, 2020 11:20:24 GMT
Hi, I don't think we have the different revisions documented anywhere. Why are you interested in this? Probably I can probably answer most questions if you want info on a specific module. there’s an important one that i only learnt the other day from Robert... probably in a thread on here somewhere. I nearly ordered a replacement Wasp Filter “vactrol style” ... before robert told me that it’s just a new faceplate print to highlight the fact that it IS vactrol based ... there is no difference from the original kickstarter module, that’s vactrol too. phew! saved me a few euros that did. Pfff, playing the double Wasp is the new avant garde  |
|
|
|
Post by rockysmalls on Sept 14, 2020 12:23:20 GMT
there’s an important one that i only learnt the other day from Robert... probably in a thread on here somewhere. I nearly ordered a replacement Wasp Filter “vactrol style” ... before robert told me that it’s just a new faceplate print to highlight the fact that it IS vactrol based ... there is no difference from the original kickstarter module, that’s vactrol too. phew! saved me a few euros that did. Pfff, playing the double Wasp is the new avant garde it’s very tempting to have a Wasp in each ear.... but first i have to update my MS20filt to the one with hp/lp switcheroo  |
|
|
|
Post by spacedog on Sept 14, 2020 13:02:34 GMT
Pfff, playing the double Wasp is the new avant garde it’s very tempting to have a Wasp in each ear.... but first i have to update my MS20filt to the one with hp/lp switcheroo Remember to keep them both on board for the full MS20 experience |
|
|
|
Post by rockysmalls on Sept 14, 2020 17:07:33 GMT
it’s very tempting to have a Wasp in each ear.... but first i have to update my MS20filt to the one with hp/lp switcheroo Remember to keep them both on board for the full MS20 experience that’s definitely the plan... though i do have the Beh###ger K-2 thing in case i want something closer to MS20-ville |
|
|
|
Post by MikMo on Sept 14, 2020 17:39:37 GMT
I have two wasp filters, because there was one in the second hand system i bought. Luckily there was also the Sv filter thai i did not already have, so i only need the Nyle filter. You gotta get them all  |
|
|
|
Post by rummelfigge on Sept 15, 2020 23:40:31 GMT
Okay, thank you very much!
But what is the difference between the master module in Rev. 2, 3 and 4 as an example?
|
|
|
|
Post by admin on Sept 15, 2020 23:44:28 GMT
Okay, thank you very much! But what is the difference between the master module in Rev. 2, 3 and 4 as an example? I'm not sure exactly at which version this happened, but the newer versions of the Master module have a means to select the MIDI channel between omni, 1, 14,15 or 16. |
|
