|
|
Post by 101 on Sept 8, 2020 8:57:40 GMT
Been mentally building a possible extra rack (endlessly).
Toying with the idea of adding a 2nd SEQ16. Anyone here rocking that? If so do they stay in sync? (it would be pants if they didn't).
|
|
|
|
Post by spacedog on Sept 8, 2020 11:31:50 GMT
Been mentally building a possible extra rack (endlessly). Toying with the idea of adding a 2nd SEQ16. Anyone here rocking that? If so do they stay in sync? (it would be pants if they didn't). I don't, although I have thought about it to build a more Moog-like sequencer setup, maybe using the 3CVSWITCH to chain them (an experiment that needs more than one SEQ16  ). As long a they're sent the same clock signal, the steps will progress at the same pace. Of course, you could get clever with the resets to produce more interesting parallel/serial patterns. I did something similar with one of the patch challenge a while ago, where I used the TRIQ164 to fire off the reset signals. I then played with the TRIQ164 to create ratcheted and more random sequences. My point in saying the last bit is that I clocked the SEQ16 and the TRIQ164 from the same source and they stayed perfectly in sync, hence my thought that intuitively the same is true for two SEQ16 modules. |
|
|
|
Post by spacedog on Sept 8, 2020 12:07:14 GMT
Been mentally building a possible extra rack (endlessly). Toying with the idea of adding a 2nd SEQ16. Anyone here rocking that? If so do they stay in sync? (it would be pants if they didn't). I don't, although I have thought about it to build a more Moog-like sequencer setup, maybe using the 3CVSWITCH to chain them (an experiment that needs more than one SEQ16 ). As long a they're sent the same clock signal, the steps will progress at the same pace. Of course, you could get clever with the resets to produce more interesting parallel/serial patterns. I did something similar with one of the patch challenge a while ago, where I used the TRIQ164 to fire off the reset signals. I then played with the TRIQ164 to create ratcheted and more random sequences. My point in saying the last bit is that I clocked the SEQ16 and the TRIQ164 from the same source and they stayed perfectly in sync, hence my thought that intuitively the same is true for two SEQ16 modules. It was this track, about 2/3rds of the way through, once the messing about with the phaser stops  |
|
Jihel
Full Member
knobs, knobs, and knobs !
Posts: 241
|
Post by Jihel on Sept 8, 2020 12:22:22 GMT
Like a lot these "ratcheted" sequences  |
|
|
|
Post by funbun on Sept 8, 2020 17:41:30 GMT
Yes, I use two SEQ16s, and about to order two more. They stay in perfect sync. In fact I'm hoping Robert finishes that trigger delay so I get get some phasing effects. Here's how I use them: blackwarriorlures.com/2020-08-04theminimalist/ |
|
|
|
Post by 101 on Sept 8, 2020 20:05:29 GMT
Thank's funbun that's reassuring to know. I'm liking yours and spacedogs tracks. Soothes the soul.
|
|
Lugia
Wiki Editors
Ridiculously busy...ish.
Posts: 556 
|
Post by Lugia on Sept 9, 2020 3:53:19 GMT
Running three here, plus a STEP10 and a TRIQ164. I also have three 3VCSSWITCHes, and there's two QUANTIZERS that are still over in Murnau, waiting for shipment with a few other widgets.
|
|
|
|
Post by young Protoboard on Sept 9, 2020 19:35:55 GMT
Running three here, plus a STEP10 and a TRIQ164. I also have three 3VCSSWITCHes, and there's two QUANTIZERS that are still over in Murnau, waiting for shipment with a few other widgets. I feel like this might need a BIG asterisk****** given that your instrument is 160U, the outlier of outliers. |
|
|
|
Post by solipsistnation on Sept 20, 2020 20:55:17 GMT
Yeah, I've got 2 SEQ16s, a SEQ8 and a TRIQ164 and a TOPOGRAF.
They mostly stay in sync-- I've been running a MIDI clock into the master module, then using the bus sync to clock all of them. I also patch the bus Start signal into the reset input on each of the sequencery modules. I've noticed that sometimes some piece of this gets a little out of sync-- like it skips a step somewhere in there. I haven't sat down to figure out what, though-- I need to do some experimentation to make sure it's not, for example, TOPOGRAF doing something that just sounds odd. I was just messing with it and made this: soundcloud.com/solipsistnation/noodling1
You can hear the timing get confused at about 1:25.
Again, I don't think that's the modules necessarily-- i need to try clocking from just an LFO and see if I can narrow it down but I haven't had a chance to poke at it much yet.
|
|
). As long a they're sent the same clock signal, the steps will progress at the same pace. 
