namke
wonkystuff
electronics and sound, what's not to like?!
Posts: 654
|
Post by namke on Sept 2, 2020 20:40:29 GMT
I uploaded this a couple of weeks back and, whilst it's not 'pure AEModular', it does feature pretty heavily  * Tangible Waves' AEModular * Roland TR-808 * Sennheiser e912 Enjoy! (?) |
|
Jihel
Full Member
knobs, knobs, and knobs !
Posts: 241
|
Post by Jihel on Sept 3, 2020 5:29:24 GMT
Enjoy! (?)
Yes, I enjoyed this track !  I liked the slow progress of the drums, and the mood.
|
|
|
|
Post by moruial on Sept 3, 2020 7:24:54 GMT
Nice mood.
I was wondering what is this black module on your AEM?
|
|
Jihel
Full Member
knobs, knobs, and knobs !
Posts: 241
|
Post by Jihel on Sept 3, 2020 14:53:08 GMT
Maybe the 3x3 matrix mixer by Wonkystuff, but not sure.
Attachments:
|
|
|
|
Post by slowscape on Sept 3, 2020 15:41:03 GMT
Yep looks like the module I've been trying to BUY since namke mentioned it in chat!!  Ps. This track gets real groovy!
|
|
|
|
Post by spacedog on Sept 3, 2020 15:45:27 GMT
Maybe the 3x3 matrix mixer by Wonkystuff, but not sure.
When I looked at the pictures on FB, I noticed that the WASPFILTER next to it says "Vactrol Type", which mine doesn't. I must have missed that change. The Wiki shows the "old" version as well.
As for the Wonkystuff mixer, I must have missed the memo on that as well. Even if there was an alert here that something was being announced via FB, that would be helpful. I can only imagine that FB must be heaving with activity, and I've missed that as well
|
|
namke
wonkystuff
electronics and sound, what's not to like?!
Posts: 654
|
Post by namke on Sept 3, 2020 17:46:49 GMT
Nice mood. I was wondering what is this black module on your AEM? I think Jihel has it  It's actually the 'version zero' of the mm33 ( the one where I found I had misplaced the mounting holes so had to get another batch of PCBs made I like the new panel better though  |
|
namke
wonkystuff
electronics and sound, what's not to like?!
Posts: 654
|
Post by namke on Sept 3, 2020 17:47:44 GMT
Yep looks like the module I've been trying to BUY since namke mentioned it in chat!! Ps. This track gets real groovy!
There's one reserved for you, don't worry |
|
namke
wonkystuff
electronics and sound, what's not to like?!
Posts: 654
|
Post by namke on Sept 3, 2020 17:51:35 GMT
Maybe the 3x3 matrix mixer by Wonkystuff, but not sure.
When I looked at the pictures on FB, I noticed that the WASPFILTER next to it says "Vactrol Type", which mine doesn't. I must have missed that change. The Wiki shows the "old" version as well.
As for the Wonkystuff mixer, I must have missed the memo on that as well. Even if there was an alert here that something was being announced via FB, that would be helpful. I can only imagine that FB must be heaving with activity, and I've missed that as well
Yeah, I'm not good on publicity, and I'm just waiting for the last parts (the PCB mounting 'legs') before I can start shipping. The first run is only small (15) but I am planning a second run… The mixer will be available as a kit or as prebuilt, because I know how people like to make stuff (and save a few quid) I will make a proper announcement here at some point soon…! |
|
|
|
Post by moruial on Sept 3, 2020 18:01:26 GMT
Can you explain what it is exactly? because it looks a bit more that just a "simple" mixer |
|
namke
wonkystuff
electronics and sound, what's not to like?!
Posts: 654
|
Post by namke on Sept 3, 2020 18:07:39 GMT
Can you explain what it is exactly? because it looks a bit more that just a "simple" mixer Sure! It's a matrix mixer with 3 ins and 3 outs. Basically you can route any input to any output, changing the mix of the inputs. It can be used for control signals (LFO, env etc.) as well as audio signals - or both! So you can superimpose an audio signal onto an LFO should you so desire. It has been used in 'avant garde' music for some time (David Tudor is a name that often comes up). Each input channel has two inputs (intended to be used independently, but I suppose there's no reason not to use both at the same time!) one is DC-coupled (for control signals) and the other is AC coupled (for audio). There pretty much isn't any 'wrong way' to use it Quite often, matrix mixers are used for 'no-input' setups, where effects pedals (usually delay or reverb) have their inputs and outputs connected to the mixer and complex feedback paths are possible. There's a wikipedia page here My latest #52weeksofsound track uses it too mm33 (3)For the parts where I'm using the matrix mixer for audio processing, I had the lofi-delay connected between the 'z' output and the '3' input ('x' and 'y' outputs were sent to my mixer via the Master module). This meant that I could pan signals by changing the 'x' and 'y' levels, send signals into the delay and also control the amount of feedback/repeats of the delay from the mixer. |
|
|
|
Post by moruial on Sept 3, 2020 19:32:49 GMT
I don't feel like I've fully understood what it is all about, but thanks for the inshight!
|
|
namke
wonkystuff
electronics and sound, what's not to like?!
Posts: 654
|
Post by namke on Sept 4, 2020 7:11:50 GMT
I don't feel like I've fully understood what it is all about, but thanks for the inshight! Maybe I should make a video for the WonkyStuff YouTube channel running through the features … I’ll see if I can do one this weekend! |
|
|
|
Post by moruial on Sept 4, 2020 7:51:26 GMT
Maybe I should make a video for the WonkyStuff YouTube channel running through the features … I’ll see if I can do one this weekend! That would be helpful indeed |
|
namke
wonkystuff
electronics and sound, what's not to like?!
Posts: 654
|
Post by namke on Sept 5, 2020 19:00:37 GMT
|
|
|
|
Post by rodney on Sept 6, 2020 23:50:19 GMT
Looks so great! This is the first AE module ever made and sold outside Tangible Waves. That is a bigger deal than we might first imagine. It is a major milestone in the transition if AE to a real ecosystem with lots of makers as we see in eurorack, for example. robertlanger must be pretty pleased. I also really like the way other synth designers are working with Robert for new modules from his shop. That is a great way to minimise risk to designers testing the waters but not ready to commit to a production run.
A matrix mixer is a perfect first product, since there is a definite need for it and TW don't seem to have one planned. Plus, a black module looks so badass amongst all the bAEttleship grey. |
|
|
|
Post by otakumike on Sept 26, 2020 20:19:22 GMT
Can you explain what it is exactly? because it looks a bit more that just a "simple" mixer Sure! It's a matrix mixer with 3 ins and 3 outs. Basically you can route any input to any output, changing the mix of the inputs. It can be used for control signals (LFO, env etc.) as well as audio signals - or both! So you can superimpose an audio signal onto an LFO should you so desire. It has been used in 'avant garde' music for some time (David Tudor is a name that often comes up). Each input channel has two inputs (intended to be used independently, but I suppose there's no reason not to use both at the same time!) one is DC-coupled (for control signals) and the other is AC coupled (for audio). There pretty much isn't any 'wrong way' to use it Quite often, matrix mixers are used for 'no-input' setups, where effects pedals (usually delay or reverb) have their inputs and outputs connected to the mixer and complex feedback paths are possible. There's a wikipedia page here My latest #52weeksofsound track uses it too mm33 (3)For the parts where I'm using the matrix mixer for audio processing, I had the lofi-delay connected between the 'z' output and the '3' input ('x' and 'y' outputs were sent to my mixer via the Master module). This meant that I could pan signals by changing the 'x' and 'y' levels, send signals into the delay and also control the amount of feedback/repeats of the delay from the mixer. This post helped a great deal. I’m about to start playing with mine again now |
|
It's actually the 'version zero' of the mm33 ( the one where I found I had misplaced the mounting holes so had to get another batch of PCBs made 
