|
|
Post by chiptuna on Jun 30, 2020 19:44:56 GMT
Hi. Just wanted to order my first set up, but I already have dozens of power supplies at home.
I can’t find any info about the Master module connection? What’s the polarity? Dimension of the socket (es. like the standard for pedals)?
Thank you.
|
|
|
|
Post by slowscape on Jun 30, 2020 19:53:04 GMT
Polarity is standard (negative on the outside), I'm 99% sure the jack is 5.5mm OD, 2.1mm ID
edit Welcome to the forum/ AEM community!
edit edit A good question to ask, is the power adapter included with the module? ( admin You might want to clear this up on the listing) |
|
|
|
Post by admin on Jun 30, 2020 21:13:30 GMT
No, the power adapter is not included with the module, but it is included with the starter systems.
|
|
|
|
Post by chiptuna on Jun 30, 2020 22:28:42 GMT
Polarity is standard (negative on the outside), I'm 99% sure the jack is 5.5mm OD, 2.1mm ID
edit Welcome to the forum/ AEM community!
edit edit A good question to ask, is the power adapter included with the module? ( admin You might want to clear this up on the listing) Thank you! Let’s wait for someone to confirm your 99% and make it 100%! 😁 |
|
|
|
Post by admin on Jun 30, 2020 22:53:33 GMT
The power plug is centre positive and the size of a normal Guitar pedal power plug.
In fact I'm running my Zoom pedal (centre negative) and an AE Modular (centre positive) from a pedal power supply and have the AE connected via a polarity reversing cable.
|
|
Lugia
Wiki Editors
Ridiculously busy...ish.
Posts: 556 
|
Post by Lugia on Jun 30, 2020 23:04:56 GMT
The power plug is centre positive and the size of a normal Guitar pedal power plug. In fact I'm running my Zoom pedal (centre negative) and an AE Modular (centre positive) from a pedal power supply and have the AE connected via a polarity reversing cable. And on the opposite end of the spectrum, I use a Tektronix lab-grade linear supply for my 4 x 2 x 20sp system. 5 Amps at a precise 9V, loafs right along like nothing.
Given that Robert designed the system to be eminently hackable, this sort of thing works great...you can go either as simple or as hardcore as you like!
|
|
|
|
Post by robertlanger on Jul 1, 2020 6:55:27 GMT
Polarity is standard (negative on the outside), I'm 99% sure the jack is 5.5mm OD, 2.1mm ID
edit Welcome to the forum/ AEM community!
edit edit A good question to ask, is the power adapter included with the module? ( admin You might want to clear this up on the listing) Thank you! Let’s wait for someone to confirm your 99% and make it 100%! 😁 Here is the 100% confirmation! 5.5mm outside diameter, 2.1mm inside; outside ground, inside +9V DC It's a quite common standard, so any power supply with these specs should work. Even 7.5 volts DC should work. |
|
