|
|
Post by Gaëtan on Apr 30, 2020 12:36:08 GMT
Hi,
I've been wondering, I want to combine gates/triggers, but I don't have the OR module. Can I use the 4att/mix in DC mode to do that ?
|
|
|
|
Post by NightMachines on Apr 30, 2020 12:38:42 GMT
Yes  You can even attenuate the triggers/gates a little bit, so that they have different amplitudes but will still trigger their destination. Then use a copy of the 4ATT/MIX output for modulation too (e.g. for filter cutoff, decay time, etc.). |
|
|
|
Post by Gaëtan on Apr 30, 2020 16:59:22 GMT
Yes You can even attenuate the triggers/gates a little bit, so that they have different amplitudes but will still trigger their destination. Then use a copy of the 4ATT/MIX output for modulation too (e.g. for filter cutoff, decay time, etc.). Great, thanks! |
|
pol
Wiki Editors
Posts: 1,349
|
Post by pol on May 2, 2020 20:15:28 GMT
CVs can also be mixed on the Mixer4/4 module using the "B" channel if you want to save your mixer with knobs for something else...
|
|
You can even attenuate the triggers/gates a little bit, so that they have different amplitudes but will still trigger their destination. Then use a copy of the 4ATT/MIX output for modulation too (e.g. for filter cutoff, decay time, etc.).