|
|
Post by numans1 on Dec 28, 2019 17:10:45 GMT
Hi when I pitch the 2osc/d frequency to the bottom note (turning all the way to the left) the note produced is c sharp, is this correct or should it be c?
Thanks
|
|
|
|
Post by NightMachines on Dec 28, 2019 17:40:35 GMT
Did you send any CV into the pitch input? I’m not sure if anybody really looks at these things in general with modular VCOs as it’s all relative. Usually one provides a base pitch CV and then tunes the VCO to that. E.g.: you send the lowest sequencer pitch CV into the VCO and then tune the VCO to the desired root note at that CV level.
|
|
|
|
Post by robertlanger on Dec 28, 2019 19:49:25 GMT
Shortly I heard the same issue from another guy... As NightMachines stated, in the modular world oscillators are "free", not fixed to a certain "root" frequency. But of course I understand having a C as lowest note makes sense (perhaps even a bit lower); I will check this and make a modification here. |
|
|
|
Post by numans1 on Dec 29, 2019 16:00:13 GMT
Think it could be solved by calibrating the oscillator, I'll give it a try
|
|
|
|
Post by numans1 on Dec 29, 2019 17:12:18 GMT
Calibrating oscillator seems to have done the trick, now have c on full left turn and tracking seems ok
|
|
