Thought I'd share a bit of my AE Modular noodling - sorry, it's a bit longer than necessary. I build a lot of my own devices - mostly based on schematics and knowledge others have shared online, as well as modifying old bits of gear. I'm finding the AE Modular integrates superbly into my setup.
notes Here I've hooked the AE Modular up to some of my homemade stuff.
The first line of the 8-step sequencer goes to the VCO, the second to the filter. The O2 Minipops is the clock source and also triggers an ADSR which acts on a low pass filter, into which the Minipops is connected.
Meanwhile, the clock is patched to a drum sequencer that incorporates a Wav Trigger (playing drum samples on an SD card). The drum sequencer is also triggering snare and hi-hats on a Korg SAS-20 with some spring reverb applied via the mixer.
The spring reverb allows for different springs to be patched in - in this case a very long spring vertically mounted in PVC duct pipe. It produces wierd 'talking drum' like sound.
Actually, I was unsure whether to post this in the DIY section or not - I had the feeling that might be best reserved for specific projects/one by one builds, as it were.
I'm mostly relying on other people's hard work for the circuits/coding and focusing my efforts on the physical building. Glad you appreciate my design sense - for some reason I'm drawn to candy/cartoon colours - perhaps because I'm turning into a grey old man?
Anyway, here are some links to the work of others that these pieces are built upon: