paulyv
New Member
Getting to grips with it all....still.
Posts: 22
|
Post by paulyv on Aug 27, 2024 21:33:48 GMT
I suspect I plugged in an over-voltage adapter at some point. Possibly 18v. Anyone know what might have gone pop?
I assume the Master module, but if I remove it and inspect, how might I know?
Thanks
Paul
|
|
|
|
Post by admin on Aug 27, 2024 22:35:43 GMT
Hi, if you have a proper power supply of 9v centre positive, then you could connect this to the master module while it's removed from the rack. You could then use a voltage meter to test the bus output of the module at the back. Here is the reference of which signals/voltages to expect on the bus: wiki.aemodular.com/pmwiki.php/AeDiy/SignalsOnTheBusCable |
|
paulyv
New Member
Getting to grips with it all....still.
Posts: 22
|
Post by paulyv on Aug 27, 2024 22:37:48 GMT
Thanks. I have today ordered another power adapter so I can be sure I am using the right one.
|
|
paulyv
New Member
Getting to grips with it all....still.
Posts: 22
|
Post by paulyv on Sept 10, 2024 22:32:19 GMT
Happy to confirm nothing went 'pop'. A new power adapter did the trick. Thanks.
|
|
