|
|
Post by dizzeesatchel on Nov 13, 2023 23:01:07 GMT
first prototype seems to mostly work fine (except for my classic mistake of having the knobs go backwards)
it's chaotic, and very lo-fi, but it's fun
so pending a few tweaks, this'll likely be available in some form in the new year
|
|
|
|
Post by pt3r on Nov 14, 2023 6:23:39 GMT
Please, for the love of your preferred deity, stop. I'm already running out of rack real estate (again).
|
|
|
|
Post by rockysmalls on Nov 14, 2023 11:41:09 GMT
first prototype seems to mostly work fine (except for my classic mistake of having the knobs go backwards)
it's chaotic, and very lo-fi, but it's fun
so pending a few tweaks, this'll likely be available in some form in the new year
absolutely terrific, but you’ll have to make it a MuModule for p3tr (& my) sakes !  but seriously i was eyeing one of those up , but now can look forward to a more ‘integrated’ version .. p.s. where do the samples go IN? ( i’ll have to reread the github i guess ) p.p.s. are you still Ampersands? |
|
|
|
Post by dizzeesatchel on Nov 14, 2023 11:47:09 GMT
still me - just keeping things aligned across forum + discord our old friend the raspberry pi pico is stuck on the back which holds the samples. Infinitedigits made a pretty whizzy web tool which automatically converts .WAVs to the correct sample rate and detects the BPM and beat points, and spits out a custom .uf2 file  infinitedigits.co/wares/pikocore/ |
|
|
|
Post by pt3r on Nov 14, 2023 12:50:28 GMT
I really hope that those web based tools get ported to an offline version as well, I really dislike platforms that require a webbased tools to upload/configure. What happens the day the website goes down?
|
|
|
|
Post by dizzeesatchel on Nov 14, 2023 14:53:43 GMT
Fair point, i have a few devices with web configs and i think about that too. You can usually ‘save page as’ and it’ll save an offline version which works in my experience, but that might depend how it’s been implemented
|
|
|
|
Post by rockysmalls on Nov 14, 2023 15:03:36 GMT
still me - just keeping things aligned across forum + discord our old friend the raspberry pi pico is stuck on the back which holds the samples. Infinitedigits made a pretty whizzy web tool which automatically converts .WAVs to the correct sample rate and detects the BPM and beat points, and spits out a custom .uf2 file infinitedigits.co/wares/pikocore/looks like it might actually work on ios for a change (?) will the picocorAE be a 16mb version? or is it down to the user to purchase the picopi? |
|
|
|
Post by dizzeesatchel on Nov 14, 2023 15:35:05 GMT
Not decided yet but probably bring your own pico would make sense as people can choose their flavour. I’m just using the standard 2mb green board here, but others may want more space
|
|
|
|
Post by rockysmalls on Nov 14, 2023 22:15:46 GMT
definitely, the more you can stick on there the less toing & froing to the loading computer..
|
|
|
|
Post by admin on Nov 15, 2023 1:50:59 GMT
Ooooops! I better build my AEropi soon to make room on my solder desk for this beauty!
|
|
|
|
Post by rockysmalls on Nov 15, 2023 15:34:16 GMT
Ooooops! I better build my AEropi soon to make room on my solder desk for this beauty! you have a desk specifically for soldering? some people live in outrageous luxury!!  |
|
|
|
Post by maydonpoliris on Nov 15, 2023 20:16:14 GMT
this looks and sounds so cool Amperdizzeesatchelsands |
|
|
|
Post by tIB on Nov 17, 2023 11:25:14 GMT
This thing looks fun - interested!
Can it be clocked externally?
|
|
|
|
Post by pt3r on Nov 17, 2023 11:29:00 GMT
This thing looks fun - interested! Can it be clocked externally? It looks like it, at least I spotted an clk > pin header in the video som I guess/hope that that is the clock in and the clk < is consequentially the clock out? |
|
|
|
Post by dizzeesatchel on Nov 17, 2023 11:58:28 GMT
clk > is clock out and clk < is clock in, i might make the labelling less obtuse (i get confused too!) haven't played around with the sync in and out much yet but will give it a thorough testing soon. The original device is designed to sync to a Pocket Operator so i figure it should work pretty well with AE triggers as well
|
|
|
|
Post by pt3r on Nov 17, 2023 12:00:56 GMT
clk > is clock out and clk < is clock in, i might make the labelling less obtuse (i get confused too!)
Makenoise style with their hieroglyphic front panels |
|
|
|
Post by rskt on Jan 10, 2024 7:42:17 GMT
first prototype seems to mostly work fine (except for my classic mistake of having the knobs go backwards)
it's chaotic, and very lo-fi, but it's fun
so pending a few tweaks, this'll likely be available in some form in the new year
Jeez I'm so late to the party here. How did I miss this!? Looks amazing! |
|
|
|
Post by dizzeesatchel on Jan 10, 2024 9:36:03 GMT
It's pretty fun! There are also a couple of alternate firmwares available for the OG hardware which make it more of a drum/sample sequencer rather than a sample looper. Unfortunately both of them require access to the button on the pico itself to use as a 'shift' function  If it's not too much work to add an extra button to replicate this i'd like to do that as it makes the module way more flexible! Might require a bit of firmware hacking... github.com/rheslip/PikoBeatsgithub.com/rheslip/Piko-33 |
|
|
|
Post by dizzeesatchel on Jan 16, 2024 23:50:28 GMT
Little jam / teaser / demo. New panel is more explanatory, and the knobs go in the correct direction now... Going to build a handful of these up soon (need to restock on buttons!)
As a side note, i've been playing with the Shredder applet in o_C Hemispheres (based on one of those weirdly named Noise Engineering modules) and it's so cool, really good for generating random interesting melodies. I'm using it here for the melodic line and filter cutoffs. Sounds pretty good with the lofi beats
edit: forgot to add, but a recent piko firmware update apparently added some kind of MIDI over serial implementation? Now i haven't been able to test this at all but based on the description maybe this would work with Wonkymidi? Worth a try... |
|
namke
wonkystuff
electronics and sound, what's not to like?!
Posts: 654
|
Post by namke on Jan 18, 2024 17:58:19 GMT
… edit: forgot to add, but a recent piko firmware update apparently added some kind of MIDI over serial implementation? Now i haven't been able to test this at all but based on the description maybe this would work with Wonkymidi? Worth a try...Oh, that might well be interesting! I’ll take a look 😁 |
|
namke
wonkystuff
electronics and sound, what's not to like?!
Posts: 654
|
Post by namke on Jan 18, 2024 18:16:00 GMT
Looking at the lines thread, it looks like at the moment only MIDI clock is supported, and you could get that from the mb/1, however if you have an mb/1 then you might as well use its clock output 🙂 HOWEVER in the case some future implementation supports mapping of MIDI notes to the buttons, and/or CCs to the controls, the THAT would be reason enough to go MIDI 👍👍
|
|
|
|
Post by dizzeesatchel on Apr 7, 2024 15:28:30 GMT
|
|
If it's not too much work to add an extra button to replicate this i'd like to do that as it makes the module way more flexible! Might require a bit of firmware hacking...
