|
|
Post by feijai on Sept 23, 2023 8:59:12 GMT
I want to attach several (as few as 2, as many as 5) oscillators to pitch control. Can I do this via the bus CV? Isn't it essentially an unbuffered mult? How do I keep them from pulling the voltage down? Do I need to use a 4BUFFER for this purpose? Without a buffered mult, what is the effect? Does it (a) just lower the pitch of all of them in such a way that I can adjust it via their knobs (b) or also change the stretch/tracking?
|
|
|
|
Post by solipsistnation on Sept 23, 2023 16:52:45 GMT
Yeah, if you want pitch to stay stable, use a buffered mult instead of the bus. You could maybe run 2 buffered mults from the bus if you need things to be farther apart physically, but in my experience, if you run too much stuff off of any of the bus signals you will run into issues. (I use buffered mults for clock, especially.)
I think if you run multiple oscillators from the bus, you'll run into just generally weird issues depending on what you're doing. I suspect different types of oscillator will react differently, and the voltage drop might be different at different voltages, so yeah-- probably tracking would suffer.
|
|
