Fed 12V into Power module - all went fine...
May 19, 2023 11:16:44 GMT
admin and robertlanger like this
Post by rappel on May 19, 2023 11:16:44 GMT
I took the wrong transformer, instead of 9v was 12v, same connector, and used it on my AE modular rack.
Everything worked, I had a musical session, then quit.
Today I was thinking about it, could It damage some modules?
Does the Power module step down the voltage to 9v?
If 12v is passed through, some modules might have a step down converter, others not...
Are there some modules that could be damaged if fed with 12v?
Or misbehave?
I did it unintentionally, I checked the wiki for some technical details on overvoltage and it only speaks about eurorack
levels that can clip, but nothing on the main pwr voltage. ty.
Everything worked, I had a musical session, then quit.
Today I was thinking about it, could It damage some modules?
Does the Power module step down the voltage to 9v?
If 12v is passed through, some modules might have a step down converter, others not...
Are there some modules that could be damaged if fed with 12v?
Or misbehave?
I did it unintentionally, I checked the wiki for some technical details on overvoltage and it only speaks about eurorack
levels that can clip, but nothing on the main pwr voltage. ty.
