|
|
Post by Synths&Things on Apr 10, 2019 8:47:38 GMT
Soooo.... after touring a bit, my AE is already receiving some scratches. Obviously i can travel it safely in the box, but I rather don't want to dispatch the patch. Next to that I'm scared if I keep it patched, The pins might break of the cables may break. Is there anybody who has designed a decksaver solution for the this particular purpose? Rather like to keep it as light and small as possible due to travel reasons :-). Alternative DIY options are also more than welcome!!!
|
|
|
|
Post by robertlanger on Apr 10, 2019 13:07:55 GMT
Hi, I just made a first prototype for a transport case, looks like this:  It still needs some improvements after testing it for my trip to Florence / MEFF exhibition. But something like this will show up in the near future available regularly. |
|
|
|
Post by jezza2480 on Apr 11, 2019 9:21:41 GMT
Wow!! I can wait for one of these, Ive been looking for a case option. What will it be made from, any ideas?
|
|
|
|
Post by Synths&Things on Sept 3, 2019 18:27:48 GMT
This looks really sharp!
|
|
|
|
Post by testsound on Sept 5, 2019 7:45:10 GMT
One of my projects was to build custom dust covers for the AE Rack 1 out of acrylic. Unlike normal decksavers, I wanted to have extra headroom for the patch cables so I could keep the synth patched. Unfortunately, gluing together acrylic pieces is not easy; the glue gives off very toxic fumes and you need accurate 90 degree joint clamps.
|
|
|
|
Post by Synths&Things on Sept 5, 2019 8:12:30 GMT
One of my projects was to build custom dust covers for the AE Rack 1 out of acrylic. Unlike normal decksavers, I wanted to have extra headroom for the patch cables so I could keep the synth patched. Unfortunately, gluing together acrylic pieces is not easy; the glue gives off very toxic fumes and you need accurate 90 degree joint clamps. I had the same idea. Still figuring out what would be the most slim and easy to build |
|
|
|
Post by Gaëtan on Sept 5, 2019 9:01:28 GMT
Plywood simply ? You could even have only the top made of acrylic if you want it to be transparent
|
|
|
|
Post by Synths&Things on Sept 5, 2019 9:33:38 GMT
Plywood simply ? You could even have only the top made of acrylic if you want it to be transparent How would you design it so it's stuck to the modular itself and can easily be removed? |
|
|
|
Post by Gaëtan on Sept 5, 2019 11:02:07 GMT
Plywood simply ? You could even have only the top made of acrylic if you want it to be transparent How would you design it so it's stuck to the modular itself and can easily be removed? Sorry, I'm not sure what exactly you mean. I have never tried decksavers, do they fit in such a way that they don't simply fall off if you move the synth ?
If you want a simple dust cover, you can simply make a box without a bottom of the required size. Make the sides out of plywood and the top out of acrylic, they can easily be glued or screwed together. If you want something that you can transport, I think the best choice is a briefcase in the style Robert showed. It would be easy enough to keep the synth from moving in the bottom half of the case, but in order for the patch cables to actually remain patched, you're going to need foam I think, otherwise they would just unplug from the movement of trqnsportation (especially if transported sideways). It's not such a problem with the new connectors and patch cables, but still, there's nothing securing them in the hole.
|
|
doc
New Member
Posts: 18
|
Post by doc on Sept 5, 2019 11:36:36 GMT
Hi, I just made a first prototype for a transport case, looks like this: View AttachmentIt still needs some improvements after testing it for my trip to Florence / MEFF exhibition. But something like this will show up in the near future available regularly. Any plans for a four row case? I'm kinda low on space and was thinking another two row case would have me set for quite some time... |
|
|
|
Post by Synths&Things on Sept 5, 2019 12:21:18 GMT
How would you design it so it's stuck to the modular itself and can easily be removed? Sorry, I'm not sure what exactly you mean. I have never tried decksavers, do they fit in such a way that they don't simply fall off if you move the synth ?
If you want a simple dust cover, you can simply make a box without a bottom of the required size. Make the sides out of plywood and the top out of acrylic, they can easily be glued or screwed together. If you want something that you can transport, I think the best choice is a briefcase in the style Robert showed. It would be easy enough to keep the synth from moving in the bottom half of the case, but in order for the patch cables to actually remain patched, you're going to need foam I think, otherwise they would just unplug from the movement of trqnsportation (especially if transported sideways). It's not such a problem with the new connectors and patch cables, but still, there's nothing securing them in the hole.
I actually need a cover so I can put it in my pelican case without using too much space. My AE is already pretty beaten up due to touring without a cover/case for it. |
|
Lugia
Wiki Editors
Ridiculously busy...ish.
Posts: 556 
|
Post by Lugia on Sept 5, 2019 21:32:21 GMT
Transport case ideas, off the shelf:
All of these can be gotten with cubed foam, allowing users to custom-configure the interior to fit the AE cabs properly on all three dimensions. Not really any good 20sp double options in SKB's lines for a single cab, unfortunately...but look at it as an excuse for that second AE cab to fill up!  |
|
|
|
Post by Synths&Things on Sept 6, 2019 8:40:31 GMT
Transport case ideas, off the shelf:
All of these can be gotten with cubed foam, allowing users to custom-configure the interior to fit the AE cabs properly on all three dimensions. Not really any good 20sp double options in SKB's lines for a single cab, unfortunately...but look at it as an excuse for that second AE cab to fill up! Thanks mate! Love it how they selling it with the guns on top :'). Anyhow, I rather don't use another case for specifically the modular. As I already have 2 pelicases for touring, i would love to have a slim alternative that can hold a patch and would fit into 1 of my pelicases without taking too much space. Probably going to look for a DIY solution. Will share the outcome if the time is there, unless somebody comes with an alternative in this thread, haha  . |
|
Lugia
Wiki Editors
Ridiculously busy...ish.
Posts: 556
|
Post by Lugia on Sept 11, 2019 1:05:22 GMT
Thanks mate! Love it how they selling it with the guns on top :'). Well, some are definitely gun cases. But the upside of using those is that these tend to be very rugged, outdoorsable, and lockable...designed to be out in the field when hunting, which can be a rather equipment-hostile environment for guns (and electronics, of course). I've repurposed some of these for quite some time now; when I had my MC-202, it would get transported in a double sidearm case in which I'd cut the middle foam layer to hold the synth in the dead-center of the case. VERY smashproof!
Plus, the cost...even with SKB's gun cases, you still come in cheaper with those than their keyboard case counterparts. And if you have access to a hunting supply store (Field & Stream, BassPro, Cabela's, etc), there's other brands that come in even cheaper than SKB.
|
|
morgs
Junior Member
Posts: 54
|
Post by morgs on Sept 12, 2019 22:51:25 GMT
After a lot of looking around for something slim I found a BBQ set on Amazon for cheap and the dimensions fit the Starter Rack 2 perfectly. There is some room in the back to keep your cables etc but not much else. You have to rip out the velcro see third photo) but you get some BBQ tools if that's your jam. It's certainly not as great as Robert's prototype but you can definitely keep your cables in tact. You can also add some foam for more protection. www.amazon.co.uk/gp/product/B078MWYRVR/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1Some photos of what it looks like:    |
|
|
|
Post by Synths&Things on Sept 13, 2019 15:02:45 GMT
After a lot of looking around for something slim I found a BBQ set on Amazon for cheap and the dimensions fit the Starter Rack 2 perfectly. There is some room in the back to keep your cables etc but not much else. You have to rip out the velcro see third photo) but you get some BBQ tools if that's your jam. It's certainly not as great as Robert's prototype but you can definitely keep your cables in tact. You can also add some foam for more protection. www.amazon.co.uk/gp/product/B078MWYRVR/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1Some photos of what it looks like: That looks pretty good! May get rid of the handle in my case #punintended. |
|
|
|
Post by rodney on Sept 17, 2019 1:31:16 GMT
After a lot of looking around for something slim I found a BBQ set on Amazon for cheap and the dimensions fit the Starter Rack 2 perfectly. There is some room in the back to keep your cables etc but not much else. You have to rip out the velcro see third photo) but you get some BBQ tools if that's your jam. It's certainly not as great as Robert's prototype but you can definitely keep your cables in tact. You can also add some foam for more protection. www.amazon.co.uk/gp/product/B078MWYRVR/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1Some photos of what it looks like: Good find! |
|
|
|
Post by rodney on Sept 17, 2019 1:39:49 GMT
I got over-excited and ordered my AE system in a double 20u size. I keep finding nice cases on the street that would fit a 16u AE perfectly but nothing wider. Of course, there are lots to choose from in China but it's a long process finding the right internal dimensions... I am thinking that I may just cannibalize one of my found cases for the fittings (handle, hinges, corner pieces etc.) and use them to make a custom-fit with plywood and aluminium.
I'll definitely check for barbecue sets first though. There should be a glut of them here as Sydney slips back out of its brief winter and the smell of burning flesh fills the weekend air once again!
|
|
|
|
Post by Synths&Things on Sept 18, 2019 9:16:56 GMT
After browsing the world wide web, I think I found a way of making a case I desire. After watching this video I was convinced balsa wood is the material I want to use. It's slim, cheap and can take a punch. It seems easy to build with the material as well. Waiting for the end of the month to start this project! |
|
|
|
Post by anthonymd303 on Sept 26, 2019 7:53:23 GMT
I think the cheapest and easiest route would be to find a decent sized suitcase from goodwill(the one by me has gobs of them for less than 10 bucks) and buy an appropriate sized slab of foam rubber from an arts and crafts store and cut to fit. Shouldn't total more than 30 bucks and you have a totally unique, custom case to secure your rack.
|
|
ben
Full Member
Posts: 124
|
Post by ben on Sept 26, 2019 10:28:12 GMT
After browsing the world wide web, I think I found a way of making a case I desire. After watching this video I was convinced balsa wood is the material I want to use. It's slim, cheap and can take a punch. It seems easy to build with the material as well. Waiting for the end of the month to start this project! I would be careful by choosing balsa as a main material. It's super light, but also quite fragile comparing to, for example, plywood. And a bit more expensive than a regular plywood. Of course plywood is a bit heavier and requires more tools to work with. Some 20-15 years ago i was used to work a lot with balsa, making gliders, RC planes, rockets and what not - it suits perfectly for that kind of stuff. If you're not planning to travel with this case and just keep it safe at home - then balsa might be a good option. |
|
|
|
Post by Synths&Things on Sept 26, 2019 11:46:54 GMT
After browsing the world wide web, I think I found a way of making a case I desire. After watching this video I was convinced balsa wood is the material I want to use. It's slim, cheap and can take a punch. It seems easy to build with the material as well. Waiting for the end of the month to start this project! I would be careful by choosing balsa as a main material. It's super light, but also quite fragile comparing to, for example, plywood. And a bit more expensive than a regular plywood. Of course plywood is a bit heavier and requires more tools to work with. Some 20-15 years ago i was used to work a lot with balsa, making gliders, RC planes, rockets and what not - it suits perfectly for that kind of stuff. If you're not planning to travel with this case and just keep it safe at home - then balsa might be a good option. I understand your concern, but my situation with travelling is a tad different. Instead of dragging the AE in a separate case, I would like to put it in a case I already use together with my other gear. The most important thing is the deck saver is slim can take a light bust when packed and gives me the opportunity to put it in my pelicase prepatched. If i would travel with the AE separately, I would definitely go for a different option ! |
|
|
|
Post by dizzeesatchel on Oct 14, 2020 12:35:51 GMT
After a lot of looking around for something slim I found a BBQ set on Amazon for cheap and the dimensions fit the Starter Rack 2 perfectly. There is some room in the back to keep your cables etc but not much else. You have to rip out the velcro see third photo) but you get some BBQ tools if that's your jam. It's certainly not as great as Robert's prototype but you can definitely keep your cables in tact. You can also add some foam for more protection. www.amazon.co.uk/gp/product/B078MWYRVR/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1Some photos of what it looks like: Apologies for dredging up this old thread but I wanted to say thanks for the tip-off on this. I picked up one of these and fitted it out last night. Looks lovely and the few cm of spare space 'behind' the SR2 is enough for cable storage and a little IKEA usb splitter which can power my SQ-1, Field Kit FX and a little lamp! Very neat, keeps the dust and cat hair off, and i can leave it patched up. Great find   |
|
morgs
Junior Member
Posts: 54
|
Post by morgs on Oct 15, 2020 10:24:38 GMT
Looks great! Good use of the velcro as well.
|
|
|
|
Post by martynaudio on Oct 20, 2020 9:57:15 GMT
After a lot of looking around for something slim I found a BBQ set on Amazon for cheap and the dimensions fit the Starter Rack 2 perfectly. There is some room in the back to keep your cables etc but not much else. You have to rip out the velcro see third photo) but you get some BBQ tools if that's your jam. It's certainly not as great as Robert's prototype but you can definitely keep your cables in tact. You can also add some foam for more protection. www.amazon.co.uk/gp/product/B078MWYRVR/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1Ah this is great, perfect for transporting! I've been thinking of building something similar but maybe this is a better option... if it had a detachable lid that would be even better, |
|
.
