|
|
Post by admin on Sept 2, 2022 13:22:10 GMT
Hello all, this is a bit late .. but you may find a few new and interesting bits of news in this blog post from tangible waves. Also remember that today is Bandcamp Friday, a perfect time to show your appreciation for our artists by buying their albums! www.tangiblewaves.com/news/august-2022-going-solar |
|
|
|
Post by funbun on Sept 2, 2022 14:49:08 GMT
Nice to see the microCASE.
|
|
|
|
Post by martynaudio on Sept 2, 2022 16:16:15 GMT
Awesome! Great to see Robert is looking at solar for AE
|
|
pol
Wiki Editors
Posts: 1,349
|
Post by pol on Sept 3, 2022 15:47:06 GMT
Sorry, missed this one, so started my own thread, 
Basically I was concerned about the micro racks having a hole under every 1/3 module.....
Pleased maydonpoliris and I got a mention for music though - thank you!
|
|
pol
Wiki Editors
Posts: 1,349
|
Post by pol on Sept 3, 2022 20:07:12 GMT
Just reading the blog again, it says all our modules except O&C and Cirrus can be produced now - does that mean the FMOS is coming back into stock soon? (he says hopefully).....
|
|
|
|
Post by maydonpoliris on Sept 3, 2022 21:53:40 GMT
is the mystery module a complex VCO/Arpegiator combo........  |
|
S&E
Full Member
Posts: 116
|
Post by S&E on Sept 4, 2022 7:27:06 GMT
The microcase and the solar don’t really interest me. I’m already bought into the micro panels as they are and while I think the cost is a bit high I’ve bit the bullet and won’t be going the case route. With solar i had considered usb solar panels (to use with a myvolts 9 volt center positive cable) but solar panels don’t seem very efficient currently. Kind of gimmicky. So I’m sticking with usb bricks. I am thinking of buying a solar capable usb brick though, but I hear they take a long time to charge.
|
|
|
|
Post by rockysmalls on Sept 4, 2022 10:02:49 GMT
Sorry, missed this one, so started my own thread,
Basically I was concerned about the micro racks having a hole under every 1/3 module.....
Pleased maydonpoliris and I got a mention for music though - thank you!
i was thinking the same thing, though of course I have no idea if my preference for a 1/3rd sized strip case is practically possible with all the switches and sockets and ribbons needed in there?? I’m sure Robert can enlighten us. I was thinking i would be fine to just use the 1u baseplates for 1/2 size modules ( i think namke ‘s ‘on it’s way’ snare module will be 1/2 size ) .. and I really wanted to avoid the ‘Hinge Thing’ and just have a strip of 20 1/3rds attached directly to the top of my 2 row x 20 case ,, all nice and solid , there’s probably a diy way of doing this perhaps? what is the possibility of 1/6th sized modules to fill up those spaces?  bwahahahaha! ( no... seriously all you micro engineers out there! ) |
|
|
|
Post by rockysmalls on Sept 4, 2022 10:11:38 GMT
the Micro:bit looks amazing for the educational scene ,,, and it’s great that it can all work from iPads & Phones!! I like the simple “blocks” coding , I presume visuellemusik has plans for it as a multi sensor thing ,, motors etc? maybe? Radio & bluetooth stuff? looking forward to seeing how that goes. I have NO guesses on that module prototype,,, but 14 knobs and NO screen! ? hmmmmmm. |
|
|
|
Post by visuellemusik on Sept 7, 2022 15:07:19 GMT
Hi Matt, rockysmalls - well all what you imagine in principle is possible with the micro:bit board. But so far the intergration for AE Modular mainly is centered around CV/Gate I/O and audio out, admitedly with a few additional bells and whistles ;-) But... there also is this board available which has far more possibilities (at a much higher price as well) which is pin-compatible: learn.adafruit.com/adafruit-clue Among other stuff the CLUE has a built in display, various sensors and an I2E connector, so it could be perfect for what you are envisioning. We have not tested it yet, though. Currently I am mainly working on the Arduino C++ intergration for micro:bit and AE Modular. |
|
|
|
Post by dizzeesatchel on Sept 7, 2022 16:23:14 GMT
Not very familiar with the Micro:bit but the format reminds me of the 'voice cards' used by Pico System 3, maybe it could do something similar? |
|
|
|
Post by rockysmalls on Sept 7, 2022 21:21:07 GMT
Hi Matt, rockysmalls - well all what you imagine in principle is possible with the micro:bit board. But so far the intergration for AE Modular mainly is centered around CV/Gate I/O and audio out, admitedly with a few additional bells and whistles ;-) But... there also is this board available which has far more possibilities (at a much higher price as well) which is pin-compatible: learn.adafruit.com/adafruit-clue Among other stuff the CLUE has a built in display, various sensors and an I2E connector, so it could be perfect for what you are envisioning. We have not tested it yet, though. Currently I am mainly working on the Arduino C++ intergration for micro:bit and AE Modular. love the display on the CLUE thing... this all looks ripe with serious possibilities. so much to investigate and so little time ! |
|
|
|
Post by visuellemusik on Sept 9, 2022 16:57:48 GMT
I really like the concept of the new “microCASE” for ½ modules and ⅓ modules.
Especially to sit on top of a case-setup that already consists of two racks and a hinge-kit I find this very useful. I already considered adding one more one-row rack here, but to have a narrower case also promisses to be a more sturdy and even better accessable construction.
Also maybe, especially in combination with the solar option / battery-pack module, there additionally is potential for a full size case but with connectors for micromodules only. Apart from the "battery-pack" module of course, unless this could have an additional micro-connector for this use-case?
This way especially a 12x1 case could provide incredible functionality with a minimal footprint (even without need of those individual micro-baseplates, maybe adding a tiny bit of weight), for instance to be taken "on the road" in a backpack. Of course we then would need at least one micro-module with an audio out option and maybe a volume knob "microHeadphone"?
|
|
bwahahahaha! ( no... seriously all you micro engineers out there! )
