|
|
Post by huynguyen on Mar 20, 2019 4:28:01 GMT
the new module arrived at my door couple of days ago. i finally had time to integrate and then in the proccess, rearranged my whole ae system.
TRIQ164 can be very useful when you use one of the channels to act as click signal for SEQ64. you can go fast and slow with steps on and off. then with 3VCSWITCHs it can get quite fun.
i think the TRIQ164 and other future module could benefit a lot from the use of multi color LEDs.
|
|
|
|
Post by dmoney2000 on Mar 21, 2019 12:43:37 GMT
Wow, all this makes me think I'll need a second rack!
|
|
|
|
Post by tIB on May 26, 2020 8:04:19 GMT
Does this save (last programmed) state on power cycle or will I have to reprogram it every time I turn on?
|
|
|
|
Post by bearheadwood on May 26, 2020 10:43:57 GMT
Does this save (last programmed) state on power cycle or will I have to reprogram it every time I turn on? Plugged and unplugged mine and it reset itself when I did so. So it seems like a no for the saving.  |
|
|
|
Post by tIB on May 26, 2020 12:15:38 GMT
Does this save (last programmed) state on power cycle or will I have to reprogram it every time I turn on? Plugged and unplugged mine and it reset itself when I did so. So it seems like a no for the saving. Thanks. I assumed that would be the case - suspect it may not be for me but will have a play with it to see first. |
|
|
|
Post by slowscape on May 26, 2020 13:52:27 GMT
bearheadwood my TRIQ164 seems to save it’s state. dmoney2000 I believe I will be selling (or trading) mine soon if you don’t want the wait!
|
|
|
|
Post by tIB on May 26, 2020 17:38:21 GMT
bearheadwood my TRIQ164 seems to save it’s state. dmoney2000 I believe I will be selling (or trading) mine soon if you don’t want the wait! Ooh, so maybe it does? |
|
|
|
Post by bearheadwood on May 26, 2020 23:39:58 GMT
 Sequencer fight! I'm going to have to check it a fourth time when I get home from work now.  |
|
|
|
Post by bearheadwood on May 27, 2020 9:39:52 GMT
And the outcome is.... Definitely holding the sequence when powered off and back on. I must have been changing the sequence on channels 2, 3 or 4 and not channel 1 and it resets to that channel when you plug it back in, then I saw that. O discordia! Looks like you're golden tIB ! |
|
|
|
Post by admin on May 27, 2020 9:53:35 GMT
I found the result intermittent with sometimes saving, sometimes don't. Sometimes only one channel but not the others. Then I asked robertlanger about it and he said that to save EEPROM cycles he only stores the state if there were no changes for 10 seconds. So it's something of a timing thing. |
|
|
|
Post by tIB on May 27, 2020 13:01:39 GMT
Excellent, thanks very much for the info all.
|
|
