|
|
Post by jimread on Jun 3, 2022 20:21:21 GMT
Hello there, I'm making Rob Hordijk's Benjolin which I think outputs 0-9V this is as far as I have got with the build  Is it possible to plug this directly into the Master Audio I/O socket or do I need to later the output to O-5V? I'd be grateful for any help. Cheers I can make a 5V converter from a few resistors, a diode and a Zener diode |
|
|
|
Post by pt3r on Jun 3, 2022 21:32:51 GMT
4 I/O or the Master I/O will happily take that 9 volt and bring it down to AE levels.
|
|
|
|
Post by jimread on Jun 4, 2022 13:41:34 GMT
Hello pt3r thanks ever such a lot for the reply, all I need is the audio output from the Benjolin, though there are lots of others, it means that I can use the AE filters etc to perform various tasks. Really great :-) Cheers |
|
|
|
Post by pt3r on Jun 4, 2022 17:27:13 GMT
you can also send cv but negative voltages will be omitted by AE.
|
|
pol
Wiki Editors
Posts: 1,349
|
Post by pol on Jun 5, 2022 10:18:10 GMT
you can also send cv but negative voltages will be omitted by AE. Still through the 4 I/O or master units for safety though! |
|
|
|
Post by jimread on Jun 5, 2022 10:44:03 GMT
Thanks for the advice both,
There are various outputs from it the Rungler one looks promising when I've made it I'll have a go at that one. I've also got a TipTop Audio One I'm going to make a little wooden box for them.
Cheers
|
|
|
|
Post by keurslagerkurt on Jun 8, 2022 16:07:08 GMT
Love that homemade PCB look 😍
Good luck on the build, and I'd happily drool over some pictures if you snap some along the way! 😄
Have been looking into the benjolin in the past, would be cool to have something similar to the 'rungler' block in AE.
|
|
