|
|
Post by williamv on Mar 21, 2022 21:01:07 GMT
 Attachments:
|
|
|
|
Post by pt3r on Mar 22, 2022 8:20:40 GMT
Question? Statement?
|
|
|
|
Post by admin on Mar 22, 2022 8:30:20 GMT
Hi williamv, I moved this thread to the Wonkystuff sub board since it's not a tangible waves product. Also your post may need a bit more description of what this patch is about. Cheers, Carsten. |
|
|
|
Post by williamv on Mar 22, 2022 9:11:35 GMT
dear carsten i am very sorry i put the post in the wrong place. thankyou very much for your continued help
|
|
|
|
Post by williamv on Mar 22, 2022 9:18:57 GMT
hello this is my kaestle patch the instructions for the wires plus a picture to see the knob settings. i think i would like any thoughts or differences plus maybe if i could have done things better or different. also i had out board panning and delay, so maybe some ideas how to incorporate those two things. also one of my problems is expanding on an existing patch some times i am successful but mostly not thankyou for your help |
|
|
|
Post by williamv on Mar 22, 2022 9:20:43 GMT
sorry i forgot to mention this is mainly for sequencer.
|
|
|
|
Post by johnoffinland on Apr 30, 2022 6:03:19 GMT
Nice to see the Kaestle module used in tandem with Kurt's DB & 5 Steps. The first Bastl Kastle was my intro to pin wire synths - which led me to wish there was a modular system using said architecture... and here we are! Full circle.
|
|
pol
Wiki Editors
Posts: 1,277
|
Post by pol on May 1, 2022 12:42:35 GMT
hello this is my kaestle patch the instructions for the wires plus a picture to see the knob settings. i think i would like any thoughts or differences plus maybe if i could have done things better or different. also i had out board panning and delay, so maybe some ideas how to incorporate those two things. also one of my problems is expanding on an existing patch some times i am successful but mostly not thankyou for your help Having had a look, it's quite hard to follow your notes and photo, probably get more repsonse if you took a photo with the wires in, ideally colour coded (e.g. Green is audio). A demo video of what it's doing even better! A few thoughts...
Not sure what the dead band is acheiving on the LFO?
You have a few things going to outs, (e.g the last line of your notes); I know there is a useful "shortcut" with most AE modules that you can combine signals this way, but is that the intention? You have VCAs going to 4 I/O but not used again in the patch according to your notes?
|
|
|
|
Kaestle?
May 13, 2022 22:27:56 GMT
via mobile
pol likes this
Post by williamv on May 13, 2022 22:27:56 GMT
Yes sorry still very much a novice and also the dyslexia is getting in the way. Thankyou for pointing out these mistakes it is very helpful to me to get a better understanding I appreciate your help
|
|
|
|
Post by williamv on May 13, 2022 22:28:45 GMT
Nice to see the Kaestle module used in tandem with Kurt's DB & 5 Steps. The first Bastl Kastle was my intro to pin wire synths - which led me to wish there was a modular system using said architecture... and here we are! Full circle. |
|
pol
Wiki Editors
Posts: 1,277
|
Post by pol on May 14, 2022 15:16:49 GMT
Yes sorry still very much a novice and also the dyslexia is getting in the way. Thankyou for pointing out these mistakes it is very helpful to me to get a better understanding I appreciate your help Hi, this may be too basic for you, but the getting started section of the Wiki might be helpful:
If you have a problem with dyslexia I would encourage you to try the videos all over the Wiki, mostly by the 5th Volt, (also the forum admin), they give an excellent grounding; here's his Youtube playlist on getting started weith various AE modules...
|
|
|
|
Kaestle?
May 14, 2022 23:53:32 GMT
via mobile
pol likes this
Post by williamv on May 14, 2022 23:53:32 GMT
Thank-you very much that is very helpful
|
|
|
|
Kaestle?
May 14, 2022 23:56:13 GMT
via mobile
pol likes this
Post by williamv on May 14, 2022 23:56:13 GMT
Great I will look at that thankyou
|
|
