|
Post by dmoney2000 on Feb 27, 2019 17:57:25 GMT
The cable length of the AE modular power supply is quite short. I have my case on a desk, and the power supply barely reaches to the surge protector on the floor. Any chance of getting power supplies with 6' cables?
Also on the front page I see that the system could be powered from a cell phone charger. How does this work? I have also seen videos of folks using battery packs to take their system outdoors, what products are recommended for doing this?
|
|
|
Post by robertlanger on Feb 27, 2019 18:17:09 GMT
For the power supply there is an extension cable available; you should find it in the shop.
Battery pack: I can recommend the PowerPlant Powerbank from Harley-Benton; available via Thomann. The advantage is that it has the 9V DC plug directly; no USB adapters needed. In the near future I will include it in the shop.
|
|
Lugia
Wiki Editors
Ridiculously busy...ish.
Posts: 556
|
Post by Lugia on Mar 1, 2019 2:03:40 GMT
Oh, speaking of "other P/S questions": if I'm feeding one Master with 9V via the side jack, is it possible to use the on-panel 9V jacks to daisy-chain Masters from that single connection? Basically, is that capable of acting as a pass-thru for a 9V source connected via the side power jack?
|
|
|
Post by robertlanger on Mar 2, 2019 6:07:33 GMT
Oh, speaking of "other P/S questions": if I'm feeding one Master with 9V via the side jack, is it possible to use the on-panel 9V jacks to daisy-chain Masters from that single connection? Basically, is that capable of acting as a pass-thru for a 9V source connected via the side power jack? Usually, the MASTER module has only one DC socket; in the transition to the socket on the front side there were some modules with both sockets, but this is not standard. But there is a DC splitter cable available in the shop exactly for this purpose - use one wall adapter and feed up to 4 devices (not necessarily AE modulars, the 9V plug is quite common).
|
|