|
|
Post by pt3r on Feb 21, 2022 9:04:19 GMT
I checked in the wiki page but I could not find any information on this;
Are the FX sends post or pre level fader?
|
|
|
|
Post by rockysmalls on Feb 21, 2022 11:27:11 GMT
I checked in the wiki page but I could not find any information on this; Are the FX sends post or pre level fader? i’m fairly sure they are “post” which is a slight shame depending on yr usage of these things. personally i would have prefered ‘pre’ but others might have a different take? |
|
|
|
Post by robertlanger on Feb 21, 2022 12:37:07 GMT
They are post fader; it seems the more usual case for me... pt3r: Could you explain why you would prefer pre fader? I'm just working on some changes at the MIXCONSOLE module anyway; maybe I can do something in this direction... |
|
|
|
Post by pt3r on Feb 21, 2022 13:29:57 GMT
If you send your fx pre fader then your level fader can act as a wet/dry balance per channel, even if the fx does not have a wet/dry balance.
The ideal would of course be if you could switch the fs send to be pre or post fade.
|
|
|
|
Post by robertlanger on Feb 21, 2022 15:00:21 GMT
If you send your fx pre fader then your level fader can act as a wet/dry balance per channel, even if the fx does not have a wet/dry balance. The ideal would of course be if you could switch the fs send to be pre or post fade. Ah ok; I was assuming (and also used mixers like this) that there is a dry/wet at the fx (although, in combination with a mixer, only the wet part of the FX is relevant....) I think two switches per channel might be space problem, but would an internal switch or jumpers on the module be helpful? |
|
|
|
Post by rockysmalls on Feb 21, 2022 16:08:47 GMT
They are post fader; it seems the more usual case for me... pt3r : Could you explain why you would prefer pre fader? I'm just working on some changes at the MIXCONSOLE module anyway; maybe I can do something in this direction... yes , pre-fader is more useful for “dub” style playing a lá Lee scratch Perry etc etc .. ie, the channel is silent ( main level down ) and a short burst of signal is sent to reverb/delay etc ... even if it was just a jumper/jumpers under the front panel or a selector switch I think it would still be fantastic to have this facility. and i would certainly buy it again for the upgrade ;-) |
|
|
|
Post by pt3r on Feb 21, 2022 18:40:59 GMT
I agree, some jumpers would probably take less place and would be perfectly fine by me if it would provide the flexibility to sepcify the pre/post mode of the fx sends. After all the whole modular is the instrument and a mixconsole would play an integral part in that.
|
|
