Post by chmeee5 on Dec 11, 2021 6:40:24 GMT
[SOLVED] I'd not used my 2S&H module for quite a while but yesterday I decided to use it to generate some random CVs - triggered by the Kyaa Euclid Grid with input from NOISE. Unfortunately I get no output at all on either channel. Neither of the LEDs light up and using METER indicates there is no signal output from OUT 1 or 2.
I also used METER to check the outputs from Euclid Grid and NOISE plus other sound and trigger sources, which were all good. I even swapped its location to ensure there wasn't a power supply issue but again, no output.
So, is there something else I can try to identify the problem or to confirm the module has carked it? I have a multi-meter I can use for testing but am not really familiar with its use; particularly considering the module is all SMD with a couple of ICs doing the heavy lifting.
EDIT: Not a 2S&H issue. Seems related to Kyaa Euclid Grid.
I also used METER to check the outputs from Euclid Grid and NOISE plus other sound and trigger sources, which were all good. I even swapped its location to ensure there wasn't a power supply issue but again, no output.
So, is there something else I can try to identify the problem or to confirm the module has carked it? I have a multi-meter I can use for testing but am not really familiar with its use; particularly considering the module is all SMD with a couple of ICs doing the heavy lifting.
EDIT: Not a 2S&H issue. Seems related to Kyaa Euclid Grid.
