|
|
Post by dizzeesatchel on Sept 10, 2021 14:54:55 GMT
A little while back Robert mentioned an excellent little eurorack fanzine called Black Panels Only which I've read a few issues of and throughly enjoyed! It inspired me to plan an aesthetic for the new rack I had on order  First of all, i knew i would have a fair number of blank panels in the rack - probably not for long, but still  - and the TW blanks are black on the rear... so i flipped 'em all over! Kind of has a nice matt effect as well.  Inspired, I took a look at all the modules available atm. Most of them unfortunately aren't symmetrical (some are frustratingly close...) but a handful are flippable!! 4BUFFER is one of those, and i'd just picked one up, so I took off the front panel, reversed it and made my own slighly abstract design with gold / silver gel pens on the rear. Then I got a cheap ink stamp kit and some brilliant white ink and stamped up the controls (with the smallest stamp i could find, but it's still a bit big - luckily the 4BUFFER is pretty simple) Around this time namke announced the black/gold BioT so *obviously* i had to get one of those in too. The VM-BRIDGE has only just arrived, so I want to put it through its paces before defacing it, but i'm pretty sure i can flip that one too, as long as the extra-thick panel around the jacks doesn't cause problems. (I also got some little hex nuts for the 3.5mm jacks on things like this and the 4I/O, MASTER module etc. Just makes everything that bit more shiny!)  Altogether I think it looks pretty nice, especially in the bamboo case! The violet patch cables (not pictured) go pretty well with it too.  I'm trying to think of some non-destructive ways to 'black panel-ize' the modules which can't be flipped, maybe a thin sheet of black acetate which could be cut to fit and screwed on top of the front panel? |
|
|
|
Post by NightMachines on Sept 10, 2021 15:22:56 GMT
A while ago there was a thread about redesigning our front panels. I wonder if the panel vector files for the laser cutter could be open-sourced. Then we could produce laser-cut stickers/paper/acrylic/metal/wood panels easily ourselves. There are also a lot of translucent gel filter colors what might give the rack a certain color, while still showing the original print on the front panels through.
|
|
|
|
Post by robertlanger on Sept 10, 2021 16:17:42 GMT
Now I can't resist showing you THIS:  I made these prototypes a short while ago but left them untouched because of all the superbooth preparation work etc. These frontpanels will be available in maybe 6-8 weeks; I hope you like them! |
|
|
|
Post by keurslagerkurt on Sept 10, 2021 16:23:26 GMT
Now I can't resist showing you THIS: View AttachmentI made these prototypes a short while ago but left them untouched because of all the superbooth preparation work etc. These frontpanels will be available in maybe 6-8 weeks; I hope you like them! Wow, just wow!!!! 😍😍😍😍 dizzeesatchel very cool and inventive job on the converting! Really dig your homebrew style |
|
|
|
Post by dizzeesatchel on Sept 10, 2021 17:19:51 GMT
Robert always one step ahead! They look great!
|
|
|
|
Post by dizzeesatchel on Sept 10, 2021 18:48:41 GMT
Also: “front panels”, is that to say the panels will be available on their own, separate from the module?
|
|
|
|
Post by rockysmalls on Sept 10, 2021 19:48:21 GMT
Now I can't resist showing you THIS: View AttachmentI made these prototypes a short while ago but left them untouched because of all the superbooth preparation work etc. These frontpanels will be available in maybe 6-8 weeks; I hope you like them! they look fab! are they of a less “warpable” material than the old ones? i would love to replace some of the more ‘bowed’ panels with nice flat panels. |
|
|
|
Post by maydonpoliris on Sept 10, 2021 20:18:17 GMT
dizzeesatchel like where you are going with this, makes your setup your own with a cool diy feel. NightMachines I'm jumping on that translucent gel filter idea. Could fit in well with led lights too. Just a thought for the clueless.... Obviously you wouldn't use solder or pour acid over your front panel while plugged in but is there anything you really shouldn't use that could rot, seep or impact the panel material permanently or pretty much all usual pens/paints/stamps etc are sweet. robertlanger looks great, Lots going on atm!.
|
|
|
|
Post by Kyaa on Sept 10, 2021 21:16:44 GMT
Now I can't resist showing you THIS: View AttachmentI made these prototypes a short while ago but left them untouched because of all the superbooth preparation work etc. These frontpanels will be available in maybe 6-8 weeks; I hope you like them! Ooh hot diggity. Looks like a 'murdered out' case might be in my future. |
|
|
|
Post by lukylutte on Sept 12, 2021 9:06:29 GMT
Nice 👍. Will take a while to get all in black systems but let's see after few years 🤣✌️
|
|
|
|
Post by dizzeesatchel on Sept 12, 2021 11:04:03 GMT
Just a thought for the clueless.... Obviously you wouldn't use solder or pour acid over your front panel while plugged in but is there anything you really shouldn't use that could rot, seep or impact the panel material permanently or pretty much all usual pens/paints/stamps etc are sweet.
Just to mention one thing, I experimented on one blank filling in the rear with permanent marker to make it 'extra-black' and it never really seemed to dry 100% I might try some kind of clear varnish over the top of my 4BUFFER depending on how the silver gel pen holds up over time. Ink stamps seem to work great though.
|
|
|
|
Post by maydonpoliris on Sept 12, 2021 20:01:57 GMT
|
|
|
|
Post by bleeeep on Oct 1, 2021 11:14:29 GMT
Hello world,
Does all the modules will be in black in futur….??
thx
|
|
|
|
Post by admin on Oct 1, 2021 11:18:06 GMT
Hello world, Does all the modules will be in black in futur….?? thx I think it's planned to offer the black panels as a variation. So you will be able to order the normal grey version or the black version. There will also be individual panels so you could upgrade your existing modules if you wanted to. |
|
|
|
Post by bleeeep on Oct 1, 2021 11:23:38 GMT
waouhh… enormous !! !! i will waiting for to get my first rack.
thank you for your answer
|
|
|
|
Post by rockysmalls on Oct 1, 2021 15:50:10 GMT
Hello world, Does all the modules will be in black in futur….?? thx I think it's planned to offer the black panels as a variation. So you will be able to order the normal grey version or the black version. There will also be individual panels so you could upgrade your existing modules if you wanted to. this will be great , i have a few that need it , especially that Quantizer module .. that thin strip at the side warps easily from just a vague temperature change! |
|
|
|
Post by dizzeesatchel on Oct 1, 2021 21:19:09 GMT
Black panel Cirrus is very appealing |
|
pol
Wiki Editors
Posts: 1,365
|
Post by pol on Oct 2, 2021 8:55:34 GMT
This thread is really tempting me just to draw on my AE modules, if it goes wrong I can just get a new panel!
|
|
|
|
Post by maydonpoliris on Oct 2, 2021 20:51:45 GMT
This thread is really tempting me just to draw on my AE modules, if it goes wrong I can just get a new panel! would love to this as well and bought some texters but then remembered I can't draw for peanuts so I am using stickers at the moment instead. Have ordered some translucent gels including black so will see if I can fit them over the top without burning the house down. |
|
pol
Wiki Editors
Posts: 1,365
|
Post by pol on Oct 3, 2021 8:04:31 GMT
This thread is really tempting me just to draw on my AE modules, if it goes wrong I can just get a new panel! would love to this as well and bought some texters but then remembered I can't draw for peanuts so I am using stickers at the moment instead. Have ordered some translucent gels including black so will see if I can fit them over the top without burning the house down. Stickers is a good idea, |
|
|
|
Post by funbun on Oct 3, 2021 12:38:29 GMT
Wow! Blacked-out front panels! I've always wanted that Moog-Roland look!
|
|
|
|
Post by bleeeep on Oct 5, 2021 14:08:15 GMT
please starter rack 1 and 2 and all modules in black color will be cooooool !!
|
|
|
|
Post by dizzeesatchel on Jan 4, 2022 14:58:17 GMT
Just looking through the TW store and noticed that black front panels are now available for all modules www.tangiblewaves.com/store/p150/BLACK_FRONTPANELS.htmlNot quite sure how one orders a black-panel version of a module though - i assumed there would be an colour option on the module store page - maybe just mention it in a comment when ordering? |
|
|
|
Post by admin on Jan 4, 2022 19:29:33 GMT
Just looking through the TW store and noticed that black front panels are now available for all modules www.tangiblewaves.com/store/p150/BLACK_FRONTPANELS.htmlNot quite sure how one orders a black-panel version of a module though - i assumed there would be an colour option on the module store page - maybe just mention it in a comment when ordering? Thanks for mentioning this. I think Robert and team haven't added the colour option to every module yet. I'll let them know! |
|
|
|
Post by tIB on Jan 25, 2022 22:03:25 GMT
Anyone know if there is a black panel option for the power module?
|
|
- and the TW blanks are black on the rear... so i flipped 'em all over! Kind of has a nice matt effect as well.
