|
|
Post by fugubot on Jan 4, 2019 20:10:33 GMT
What are people using to get a clock signal? Does AE have an internal clock source? Not sure which module. Thanks.
|
|
|
|
Clock
Jan 4, 2019 20:33:06 GMT
Post by NightMachines on Jan 4, 2019 20:33:06 GMT
I usually just use the pulse or square output of an LFO, but of course you can also plug any MIDI device that generates a clock into the MASTER I/O module and subdivide it with the BEAT DIVIDER module, which is specfically made for dividing MIDI clock pulses (as far as I understand).
|
|
|
|
Post by robertlanger on Jan 4, 2019 21:11:22 GMT
I usually just use the pulse or square output of an LFO, but of course you can also plug any MIDI device that generates a clock into the MASTER I/O module and subdivide it with the BEAT DIVIDER module, which is specfically made for dividing MIDI clock pulses (as far as I understand). "which is specfically made for dividing MIDI clock pulses (as far as I understand)." -> exactly; BEATDIVIDER usually takes the MIDI clock (1/96ths) and divides them to usual clocks like 1/4, 1/8.... plus dotted/triplets on second output. And if you don't use MIDI, an LFO is the fundamental clock source. Perhaps I make a dedicated clock module with excact BPM setting, tapping etc., but no detailed plans yet. |
|
|
|
Clock
Jan 10, 2019 0:41:57 GMT
Post by fugubot on Jan 10, 2019 0:41:57 GMT
Thanks for your answers. I'm new to modular so using the square wave for a pulse was so simple but not even on my radar. I am using a Beatstep Pro or the Keystep but doing it straight from an lfo is great. I am transitioning from midi mind to cv. Whew!
|
|
|
|
Post by sycophante on Jan 10, 2019 11:55:59 GMT
Fugubot, this might seem obvious, but if you're new to modular some perfect lessons are VCV tutorials on youtube. Check Omri Cohen, modular curiosity, VCV ideas. They explain what are the modules so you can apply what they teach to another modular system. Also it is quite easy to have a visual representation of your signals with scope or vizualisers, so every you do can be more comprehensive.
|
|
|
|
Clock
Jan 11, 2019 2:21:58 GMT
Post by fugubot on Jan 11, 2019 2:21:58 GMT
Thanks. Yup, I've been watching those videos and have vcv rack installed and running.
|
|
|
|
Clock
Jan 14, 2019 11:11:33 GMT
Post by huynguyen on Jan 14, 2019 11:11:33 GMT
I connect one of my Korg SQ-1 gate out to I/O 4 to get a 16th beat. But yeah, a BeatDivider is the best solution.
|
|
|
|
Clock
Feb 14, 2019 0:17:03 GMT
Post by thehandoflenin on Feb 14, 2019 0:17:03 GMT
The best clock source... and I swear by it for everything is...
The E-RM Multiclock
although maybe not the first thing you would buy as it’s fairly expensive.
I basically control everything that needs a clock source from it if I want things in time.
|
|
|
|
Clock
Feb 14, 2019 10:18:08 GMT
Post by spacedog on Feb 14, 2019 10:18:08 GMT
The best clock source... and I swear by it for everything is... The E-RM Multiclock although maybe not the first thing you would buy as it’s fairly expensive. I basically control everything that needs a clock source from it if I want things in time. Very interesting, and looks like a good tip - but it is pricey (£434 at Juno, for example), as you said. I spotted the following in the description: Analog clock signals are configurable in polarity, start/reset behaviour and feature a flexible clock divider. An analog LFO is available with various waveforms and a range of 0-5V.So, yes, really interesting, I'm just not sure that my personal setup justifies the expense (yet  ). Thanks for the pointer. |
|
|
|
Clock
Feb 21, 2020 17:11:25 GMT
via mobile
Post by lukylutte on Feb 21, 2020 17:11:25 GMT
Hey,
Was going to try to record my first patch for the rhythm channel but no way to get the midi clock going. I use the Disaster Area Tap tempo. I tried on channel 1 or Off. It only sends clock and works perfectly fine with everything else I plugged it in. Tried with and without Midi splitter (midi solutions quad thru). No led on the master module showing that something is happening...
Anything I should check?
|
|
one33
New Member
Posts: 5
|
Clock
Mar 14, 2020 8:23:09 GMT
Post by one33 on Mar 14, 2020 8:23:09 GMT
Hi
Just bought a starter 2 rack and awaiting its arrival. I have several volcas can i clock the AE modular using them?
|
|
|
|
Clock
Mar 14, 2020 9:09:17 GMT
Post by NightMachines on Mar 14, 2020 9:09:17 GMT
Hi Just bought a starter 2 rack and awaiting its arrival. I have several volcas can i clock the AE modular using them? Welcome Yes, you can simply patch the Volca’s analog clock output into one of the AE Modular’s 3.5mm CTRL input sockets of the MASTER I/O module and then spread the clock throughout your modular system from there, using the normal AE Modular patch leads. |
|
one33
New Member
Posts: 5
|
Clock
Mar 14, 2020 9:23:17 GMT
Post by one33 on Mar 14, 2020 9:23:17 GMT
Cool. I was hoping it would be a simple solution.
|
|
one33
New Member
Posts: 5
|
Clock
Mar 14, 2020 12:39:27 GMT
Post by one33 on Mar 14, 2020 12:39:27 GMT
Hi Just bought a starter 2 rack and awaiting its arrival. I have several volcas can i clock the AE modular using them? Welcome Yes, you can simply patch the Volca’s analog clock output into one of the AE Modular’s 3.5mm CTRL input sockets of the MASTER I/O module and then spread the clock throughout your modular system from there, using the normal AE Modular patch leads. AE modular turned up a couple of hours ago so ive only had a bit of a play so far. The volca clock works but seems to be in 1/2 time. I'm taking the clock from the ctrl1 of the i/o module is this right? |
|
|
|
Clock
Mar 14, 2020 13:06:00 GMT
via mobile
Post by NightMachines on Mar 14, 2020 13:06:00 GMT
AE modular turned up a couple of hours ago so ive only had a bit of a play so far. The volca clock works but seems to be in 1/2 time. I'm taking the clock from the ctrl1 of the i/o module is this right? If I remember correctly from owning a Volca myself a while ago, you can set the sync division factor of the Volca’s analog clock somehow. Please check the manual. In the AE Modular you can then use the MM-DIVIDER module to subdivide the clock to make it slower. |
|
one33
New Member
Posts: 5
|
Clock
Mar 14, 2020 13:09:23 GMT
Post by one33 on Mar 14, 2020 13:09:23 GMT
Thanks . I'll give it a go.
|
|
Lugia
Wiki Editors
Ridiculously busy...ish.
Posts: 556 
|
Clock
Mar 14, 2020 22:28:05 GMT
Post by Lugia on Mar 14, 2020 22:28:05 GMT
My clocking plan is to use one of THESE: www.ehx.com/products/clockworks Notice the ability of this to function as a master clock, with four "lanes" of division that also have a level control for each ones' pulse output. This is pretty important if you're planning to use one with an AE, as you don't want to exceed that +5v limitation; the Clockworks lets you do that AND also send higher-level pulses (such as the also-common +8v) from the same device without any ancillary devices. All you need is a cheap multimeter (which, if you're doing electronic music, you'd BETTER have on hand!) to get the levels set, and there you are! |
|
). Thanks for the pointer.
