|
|
Post by handclap on Jan 3, 2021 3:42:18 GMT
Hiya, I've got the starter rack and interested if anyone has used external effects with their setup? Is it possible to connect say guitar pedal ms-70 zoom or korg nts-1 or kaossilator and run the rack through that? Thanks  |
|
|
|
Post by admin on Jan 3, 2021 4:07:09 GMT
Hiya, I've got the starter rack and interested if anyone has used external effects with their setup? Is it possible to connect say guitar pedal ms-70 zoom or korg nts-1 or kaossilator and run the rack through that? Thanks Hi, Yes, you can absolutely run the output of your starter rack through an effects pedal and from there to your mixer or audio interface. It's the same as every other synthesizer. I have the MS-70 and have run my AE modular through that without any problems. Below is an old Instagram post where I have connected a very small AE rack to the Zoom MS-70 CDR: http://instagram.com/p/BzB_KTAhFlN |
|
|
|
Post by rodney on Jan 3, 2021 4:09:44 GMT
Just make sure you run it out through one of the outputs of the Master module, not directly from the jumper cable connectors as they are 0-5v, not +/-250mV that the effects are expecting. toohot!
|
|
|
|
Post by robertlanger on Jan 3, 2021 8:36:41 GMT
Just make sure you run it out through one of the outputs of the Master module, not directly from the jumper cable connectors as they are 0-5v, not +/-250mV that the effects are expecting. toohot!
Indeed; maybe through an attenuator before going into the effect. Also, I have a new module in development that handles the level adaptions and has minijack sockets for send and return, to make the job easier. Coming soon! |
|
ean
New Member
Posts: 34
|
Post by ean on Jan 3, 2021 12:14:24 GMT
I'm assuming the MIXCONSOLE with be able to use external effects with the send and returns?
|
|
|
|
Post by rodney on Jan 4, 2021 10:23:26 GMT
Just make sure you run it out through one of the outputs of the Master module, not directly from the jumper cable connectors as they are 0-5v, not +/-250mV that the effects are expecting. toohot!
Indeed; maybe through an attenuator before going into the effect. Also, I have a new module in development that handles the level adaptions and has minijack sockets for send and return, to make the job easier. Coming soon! Yay! Will it have stereo mini phono sockets in order to use a 'stereo-phono-to-2xRCA' like a stereo insert cable to send and return? |
|
