|
|
Post by 101 on Dec 31, 2020 12:46:00 GMT
I'm sure that's an affirmative. Anyone got any advice for me doing that? I'm figuring I need to use the IO inputs on the master module.
|
|
|
|
Post by timb0bsteve on Dec 31, 2020 13:47:56 GMT
Yep, either use 4I/O module or the CV inputs on the master module.
|
|
|
|
Post by admin on Dec 31, 2020 13:54:39 GMT
I'm sure that's an affirmative. Anyone got any advice for me doing that? I'm figuring I need to use the IO inputs on the master module. Yepp, possible by just connecting the SQ-1 to the CV ins on the Master module or the 4I/O. Here's a video I made a while back: |
|
|
|
Post by 101 on Dec 31, 2020 14:32:10 GMT
Excellent thanks.
|
|
|
|
Post by andrea70 on Feb 3, 2021 9:09:38 GMT
I'm sure that's an affirmative. Anyone got any advice for me doing that? I'm figuring I need to use the IO inputs on the master module. Yepp, possible by just connecting the SQ-1 to the CV ins on the Master module or the 4I/O. Here's a video I made a while back: I've bought an SQ1 and this video is perfect to start with it! thanks.
|
|
|
|
Post by danbowen on Feb 4, 2021 12:53:36 GMT
Yepp, possible by just connecting the SQ-1 to the CV ins on the Master module or the 4I/O. Here's a video I made a while back: I've bought an SQ1 and this video is perfect to start with it! thanks.
I've been using the gates out directly into AE without issue. I tried measuring the gate voltage with an multimeter and got only 1.5v although not sure how accurate that is. CV should be fine too although haven't tried it. |
|
|
|
Post by danbowen on Feb 4, 2021 15:23:14 GMT
I've bought an SQ1 and this video is perfect to start with it! thanks.
I've been using the gates out directly into AE without issue. I tried measuring the gate voltage with an multimeter and got only 1.5v although not sure how accurate that is. CV should be fine too although haven't tried it. Just tried CV direct from SQ1 and works fine. Handy if you run out of I/O on master module. |
|
