|
|
Post by dmoney2000 on Dec 5, 2020 14:57:25 GMT
I’m sure this one speaks the same 0-5v and is interpatchable with AE, just like he original Kastle. Sounds like it could add some nice extra flavors to a Topograf centered drum patch.
|
|
|
|
Post by 101 on Dec 5, 2020 19:10:01 GMT
If this can be triggered from Topograf it's a really exciting prospect. Thanks for posting.
|
|
|
|
Post by dmoney2000 on Dec 6, 2020 2:47:08 GMT
The original Kastle is sympatico with AE, as you surely know, so I don’t see why this one wouldn’t be. That trig input is right there for the patching! But I do think it functions as a single drum voice, with variability in timbre created by modulation, so it would probably work best with only a single channel of topograf.
|
|
|
|
Post by Morn Valley on Dec 6, 2020 18:04:14 GMT
They've released the code via GitHub ( github.com/bastl-instruments/kastle) and confirmed the hardware is the same as the Kastle 1.5 so if you have any experience flashing Attiny chips and a Kastle 1.5 you can try it out. |
|
|
|
Post by dildomiami on Jan 25, 2021 21:22:51 GMT
They've released the code via GitHub ( github.com/bastl-instruments/kastle) and confirmed the hardware is the same as the Kastle 1.5 so if you have any experience flashing Attiny chips and a Kastle 1.5 you can try it out. if this isn‘t a reason to finally get some flash equipment! |
|
|
|
Post by rockysmalls on Jan 26, 2021 0:01:41 GMT
They've released the code via GitHub ( github.com/bastl-instruments/kastle) and confirmed the hardware is the same as the Kastle 1.5 so if you have any experience flashing Attiny chips and a Kastle 1.5 you can try it out. if this isn‘t a reason to finally get some flash equipment! yes i have successfully flashed a Kastle V1 to be a Drum Kastle ... good job too , as the actual real Kastle Drum i got for xmas was only half functioning and a replacement will take a while here in brexitland. it’s easier if it’s an older V1.5 or 1 as they still have ATtiny’s you can pull out rather than having to wire up all the points on the new smd versions..  |
|
|
|
Post by 101 on May 31, 2021 19:42:44 GMT
I can confirm that the Bastl Kastle Drum works brilliantly with AEM. imo it should be considered as an essential external module. It prefers the old style AEM silver wires as the new ones are a bit too thick. You can patch in and out of it to AEM. There are ALOT off potential patching scenarios. Fantastic little box. Still learning it though.
|
|
