S&E
Full Member
Posts: 116
|
Post by S&E on Jun 27, 2022 2:39:04 GMT
Hi everyone. It’s been pretty quiet around here lately it seems. I have a question about the Wavefolder. I have seen sound examples with basic analog waveforms. I am wondering what it does to more complex digital waveforms, like the Algodrone or the Drone modules (with multiple waves at once) or the tbd module or even wavetable. Are the results totally messed up (like in a bad unusable way) or are they interesting and thrashy and such?
|
|
|
|
Post by robertlanger on Jun 27, 2022 7:13:22 GMT
Good point! In general, a wavefolder adds overtones, so if the input signal is already rich with overtones, it gets even denser and maybe a bit messy or distorted - which isn't necessarily a bad thing ;-)
I personally like it to put the wavefolder after a filter; depending on cutoff and resonance you get really wild, powerful sounds. But, as always, try it and listen for yourself!
|
|
|
|
Post by maydonpoliris on Jun 27, 2022 9:52:48 GMT
I think it works well with the Algo, FMOS, Solina, Dronx etc. I like a bit of distortion.
Putting one of those through a filter then the clean to the mixer and a second out through the wavefolder and maybe Dronx too and bringing the volume in to add colour.
also I find the Wavefolder has a sweet spot with those, for me the Drive and Shape is at about 1'oclock, it can get too distorted.
|
|
|
|
Post by pt3r on Jun 27, 2022 11:19:24 GMT
Interesting question, never thought about feeding the Algodrone through a wavefolder, will definitely try it out. Some interesting patch ideas here.
|
|
|
|
Post by MikMo on Jun 27, 2022 20:45:43 GMT
So, now i need to order the wavefolder too :-)
Need some utility modules as well.
So preparing a post vacation order soon.
Nice summer to you all.
|
|
pol
Wiki Editors
Posts: 1,349
|
Post by pol on Jun 29, 2022 14:11:08 GMT
I think it works well with the Algo, FMOS, Solina, Dronx etc. I like a bit of distortion. Putting one of those through a filter then the clean to the mixer and a second out through the wavefolder and maybe Dronx too and bringing the volume in to add colour. also I find the Wavefolder has a sweet spot with those, for me the Drive and Shape is at about 1'oclock, it can get too distorted. I didn't think you would ever say "too distorted",    |
|
|
|
Post by maydonpoliris on Jun 29, 2022 19:49:52 GMT
I think it works well with the Algo, FMOS, Solina, Dronx etc. I like a bit of distortion. Putting one of those through a filter then the clean to the mixer and a second out through the wavefolder and maybe Dronx too and bringing the volume in to add colour. also I find the Wavefolder has a sweet spot with those, for me the Drive and Shape is at about 1'oclock, it can get too distorted. I didn't think you would ever say "too distorted",    it was hard to write.... |
|
