|
|
Post by admin on Apr 17, 2022 23:17:20 GMT
|
|
|
|
Post by maydonpoliris on Apr 18, 2022 3:29:05 GMT
I use this and its the best. recommend adding a splitter cable and will turn multiple systems off.
|
|
|
|
Post by pt3r on Apr 18, 2022 9:00:54 GMT
That should be on the TW shop. I hate having to (un)plug the barrel everytime to power the AE up/down.
Edit: Some of you might be wondering why don't you keep the barrel plugged and unplug the powersupply? Well some modules (METER for example) have a booting problem when the powersupply is not fully ramped up, which also take some time. Therefor you need to first plug in the powersupply let it sit for a few seconds before plugging in the barrel.
|
|
|
|
Post by robertlanger on Apr 18, 2022 10:44:51 GMT
That should be on the TW shop. I hate having to (un)plug the barrel everytime to power the AE up/down.
Edit: Some of you might be wondering why don't you keep the barrel plugged and unplug the powersupply? Well some modules (METER for example) have a booting problem when the powersupply is not fully ramped up, which also take some time. Therefor you need to first plug in the powersupply let it sit for a few seconds before plugging in the barrel.
Other opinions? Should I add this to the TW shop? A quite useful accessory IMO. |
|
|
|
Post by tIB on Apr 18, 2022 10:48:35 GMT
Thumbs up from me.
|
|
|
|
Post by MaxRichardson97 on Apr 18, 2022 22:26:53 GMT
That should be on the TW shop. I hate having to (un)plug the barrel everytime to power the AE up/down.
Edit: Some of you might be wondering why don't you keep the barrel plugged and unplug the powersupply? Well some modules (METER for example) have a booting problem when the powersupply is not fully ramped up, which also take some time. Therefor you need to first plug in the powersupply let it sit for a few seconds before plugging in the barrel.
Other opinions? Should I add this to the TW shop? A quite useful accessory IMO. Absolutely, 100% Robert! I think that'd be a fantastic accessory to stock |
|
|
|
Post by dizzeesatchel on Apr 18, 2022 22:55:12 GMT
Definitely the sort of thing i’d throw into an order at some point  |
|
|
|
Post by dizzeesatchel on Apr 19, 2022 13:35:09 GMT
Just realised i've seen these sorts of things before when buying Raspberry Pi stuff. I assume they're polarity-agnostic as they never seem to mention being centre-positive or -negative?
|
|
|
|
Post by pt3r on Apr 19, 2022 14:23:16 GMT
exactly they make sure that the center of one connector connects to the center of the other connector and the same for the sleeve.
|
|
pol
Wiki Editors
Posts: 1,349
|
Post by pol on Apr 22, 2022 13:15:22 GMT
That should be on the TW shop. I hate having to (un)plug the barrel everytime to power the AE up/down.
Edit: Some of you might be wondering why don't you keep the barrel plugged and unplug the powersupply? Well some modules (METER for example) have a booting problem when the powersupply is not fully ramped up, which also take some time. Therefor you need to first plug in the powersupply let it sit for a few seconds before plugging in the barrel.
Other opinions? Should I add this to the TW shop? A quite useful accessory IMO. Yes, I bought one - maybe include with starter systems? |
|
|
|
Post by dizzeesatchel on Apr 22, 2022 13:37:01 GMT
For neatness sake I could do with one which has a right-angle output jack but seems very hard to find one like that
|
|
S&E
Full Member
Posts: 116
|
Post by S&E on Apr 23, 2022 14:23:57 GMT
They don’t deliver to US :-(
Please add to the AE shop Robert. I just did an order but I have another planned in a couple of months and will definitely get a few of these. It’s not a huge deal but it’s a nice thing to have for sure.
|
|
