I recently came across this accutronics Digi-Logtm Reverb module and I wanted to use this as a reverb FX in my AE Modular system. It turned out that it was very easy to connect and that it sounds quite nice.
I paid about β¬20 (including shipping). The accutronics Digi-Log Reverb is available in three different types with short, medium and long decay times. I use the model with the long reverb.
But on my MIXCONSOLE/3CH I have to turn the "FX2(!) SEND" knob. Do you think my MIXCONSOLE/3CH is not connected correctly? Or is this a known problem?
hi Duddex,
FX is switched on the current batch of MIXCONSOLE/3CH. several people are experiencing this 'issue'. well, if you know, it is not a big thing. anyway, wondering if anyone else noted that the CV-inputs A and B (FILL) on her/his EUCLID GRID are switched...so much 'character' everywhere.... ...
Post by keurslagerkurt on Dec 16, 2021 6:45:49 GMT
duddex Nice! I use this module as well in a diy fx pedal that i built some time ago, sounds pretty good imo! Didn't know it was so easy to connect to AE, nice stuff.
jota and then there is five Steps with it's pots in the wrong direction.. now we only need Wonkystuff to join in with some character and we are a full house! π
duddex Nice! I use this module as well in a diy fx pedal that i built some time ago, sounds pretty good imo! Didn't know it was so easy to connect to AE, nice stuff.
jota and then there is five Steps with it's pots in the wrong direction.. now we only need Wonkystuff to join in with some character and we are a full house! π
But on my MIXCONSOLE/3CH I have to turn the "FX2(!) SEND" knob. Do you think my MIXCONSOLE/3CH is not connected correctly? Or is this a known problem?
hi Duddex,
FX is switched on the current batch of MIXCONSOLE/3CH. several people are experiencing this 'issue'. well, if you know, it is not a big thing. anyway, wondering if anyone else noted that the CV-inputs A and B (FILL) on her/his EUCLID GRID are switched...so much 'character' everywhere.... ...
As long as this is a known issue it's OK for me. It's not a bug it's 'character'
FIVE STEPS does not count as we were told before! you took all the fun from us....
anyway, we'd be talking in a BEHRINGER forum, if this was not exactly out thing! (btw: in my system there is a SEQ8 with LOADS of character...got a kind of spiritual dimension already!).
namke / wonkystuff brought us the CORE1 BETA EDITION in their 'character collection'! so, he is one of us. one of us. one of us. (anyone saw that 1/2U-kick-prototype? )
Post by NightMachines on Dec 27, 2021 12:00:33 GMT
I recently played with the green Digi-Log brick, offering variable reverb decay time, for a Gotharman DIY project. You can set the reverb decay time with a pot simply (variable resistor) or you can modulated it quite dramatically too. Iβm using H11F1 ICs for voltage-controlled resistance, instead of vactrols.
I filmed two quick videos for the Gotharman LD3 project, but since I use its internal 5V bus, it would work for the AE modular too
I also whipped up a circuit diagram:
Iβm using a leftover CD4051 as a simple on/off switch for a wild feedback signal. Disregard that or use another switch.
Last Edit: Dec 27, 2021 12:07:29 GMT by NightMachines
I recently played with the green Digi-Log brick, offering variable reverb decay time, for a Gotharman DIY project. You can set the reverb decay time with a pot simply (variable resistor) or you can modulated it quite dramatically too.Β Iβm using H11F1 ICs for voltage-controlled resistance, instead of vactrols.
I filmed two quick videos for the Gotharman LD3 project, but since I use its internal 5V bus, it would work for the AE modular too
I also whipped up a circuit diagram:
Iβm using a leftover CD4051 as a simple on/off switch for a wild feedback signal. Disregard that or use another switch.
Wow, should order a bunch of H11F1's after reading that data-sheet. That's pretty much voltage-control-over-anything in a chip!!