|
|
Post by fugubot on May 6, 2019 15:48:00 GMT
 Wow! Facebook link is here but not appearing. |
|
|
|
Post by spacedog on May 6, 2019 18:57:11 GMT
Thanks, much appreciated. The link is working on my phone BTW. Funnily enough, I found the Facebook page today after mention of the new leads. I don't really use it, but the new promo video is worth a look... as are these modules.
I am very pleased to see the Algodrone on there... exciting times.
|
|
|
|
Post by arti on May 6, 2019 19:27:50 GMT
Thank You for the sneak preview! Exciting news! I wonder what new is in this divider other than previous ones. And would love to hear some sound demos of Solina module -didn't know it was coming! I've red some info about Algodrone but can't realy imagine how it will sound like. Hopfuly we will know a bit more very soon  |
|
|
|
Post by dmoney2000 on May 6, 2019 21:16:40 GMT
I know I have made this known every chance I get, but I’m so excited about these. All of your bread and butter stuff is covered now, this is the moment when AE Modular goes NUTS. I literally need all of them.
|
|
Lugia
Wiki Editors
Ridiculously busy...ish.
Posts: 556 
|
Post by Lugia on May 6, 2019 22:49:26 GMT
WOO-HOO!!! Algodrone's done, the Solina emulator's ready, and the arithmetical divider's good to go! Now, about the only other "gotta have it" for me would be the quantizer, and with Robert doing a rethink of it to _four channels,_ this is absolutely going to rock. Hopefully when I'm ready to pull the trigger on my system in a few months, that'll also be ready to go.
|
|
|
|
Post by moruial on May 7, 2019 7:39:55 GMT
ouuh that's nice! Pretty excited to know more about them and what they'll do!
|
|
|
|
Post by 101 on May 7, 2019 8:43:28 GMT
Are the Algodrone, Topograf and Solina all 2 U wide?
|
|
|
|
Post by spacedog on May 7, 2019 9:07:02 GMT
Are the Algodrone, Topograf and Solina all 2 U wide? I'm pretty certain that they are, looking at the pictures and comparing with the others. Sounds like a new case |
|
bahm
Full Member
Posts: 154
|
Post by bahm on May 7, 2019 9:33:44 GMT
Wow... Didn't expect so many of them. Empty space in my case will get less soon.
That's really cool.
|
|
|
|
Post by Gaëtan on May 7, 2019 10:20:43 GMT
I'm very curious about the Solina, especially the chord capabilities !
|
|
|
|
Post by 101 on May 7, 2019 10:22:00 GMT
Are the Algodrone, Topograf and Solina all 2 U wide? I'm pretty certain that they are, looking at the pictures and comparing with the others. Sounds like a new case I've only got 2U left. I'm going to have to choose  |
|
|
|
Post by robertlanger on May 7, 2019 11:57:47 GMT
Are the Algodrone, Topograf and Solina all 2 U wide? I'm pretty certain that they are, looking at the pictures and comparing with the others. Sounds like a new case Yes, they are all 2U wide! |
|
|
|
Post by robertlanger on May 7, 2019 12:04:06 GMT
Thank You for the sneak preview! Exciting news! I wonder what new is in this divider other than previous ones. And would love to hear some sound demos of Solina module -didn't know it was coming! I've red some info about Algodrone but can't realy imagine how it will sound like. Hopfuly we will know a bit more very soon The MM-Divider (MultiMode) has five different modes: Beat (rhythmical dividers like 1/2, 1/4, 1/8... and triplets), Binary (like the previous divider), decimal (divide by 2, 3, 4, 5, 6...), Prime numbers and Fibonacci numbers. An additional feature is "Shift", meaning the outputs are shifted (precisely: rotated) so you have the fastest output not on top, but on any other output. This might get some nice rhythmical variation... Any ideas which divider factors could make sense else? It's not totally fixed up to now... |
|
|
|
Post by arti on May 7, 2019 13:29:46 GMT
Thank You for the sneak preview! Exciting news! I wonder what new is in this divider other than previous ones. And would love to hear some sound demos of Solina module -didn't know it was coming! I've red some info about Algodrone but can't realy imagine how it will sound like. Hopfuly we will know a bit more very soon The MM-Divider (MultiMode) has five different modes: Beat (rhythmical dividers like 1/2, 1/4, 1/8... and triplets), Binary (like the previous divider), decimal (divide by 2, 3, 4, 5, 6...), Prime numbers and Fibonacci numbers. An additional feature is "Shift", meaning the outputs are shifted (precisely: rotated) so you have the fastest output not on top, but on any other output. This might get some nice rhythmical variation... Any ideas which divider factors could make sense else? It's not totally fixed up to now... Excuse my ignorance, but would a ratcheting function be out of place in this module? If not, it would be nice to have it |
|
|
|
Post by admin on May 7, 2019 13:37:00 GMT
Excuse my ignorance, but would a ratcheting function be out of place in this module? If not, it would be nice to have it And please excuse my ignorance, but wouldn't the note repeat function on the SEQ16 work like ratcheting? I don't really know what ratcheting means, so I've looked at this thread: https://www.reddit.com/r/synthesizers/comments/3sevsv/how_does_ratcheting_work/ |
|
|
|
Post by spacedog on May 7, 2019 14:25:58 GMT
Excuse my ignorance, but would a ratcheting function be out of place in this module? If not, it would be nice to have it And please excuse my ignorance, but wouldn't the note repeat function on the SEQ16 work like ratcheting? I don't really know what ratcheting means, so I've looked at this thread: https://www.reddit.com/r/synthesizers/comments/3sevsv/how_does_ratcheting_work/ Yes, I have ratchedted my sequences via a few methods now. It really is a case of providing a gate signal that periodically (or aperiodically, if you're into that) triggers a multiple of the "usual" gate. My most successful (and fun) way of doing it was to use the TRIQ164 as a Ratchet trigger through the OR2X4 with the main clock - fed into an ENV module. I'll write it up properly with a patch diagram. I used this technique in one of my Soundcloud experiments (re-linked here). Listen specifically after about 08.40, that's where I use that techhnique. I will also look to get some other examples, including other methods for a more expansive post. |
|
|
|
Post by dmoney2000 on May 7, 2019 15:58:08 GMT
Thank You for the sneak preview! Exciting news! I wonder what new is in this divider other than previous ones. And would love to hear some sound demos of Solina module -didn't know it was coming! I've red some info about Algodrone but can't realy imagine how it will sound like. Hopfuly we will know a bit more very soon The MM-Divider (MultiMode) has five different modes: Beat (rhythmical dividers like 1/2, 1/4, 1/8... and triplets), Binary (like the previous divider), decimal (divide by 2, 3, 4, 5, 6...), Prime numbers and Fibonacci numbers. An additional feature is "Shift", meaning the outputs are shifted (precisely: rotated) so you have the fastest output not on top, but on any other output. This might get some nice rhythmical variation... Any ideas which divider factors could make sense else? It's not totally fixed up to now... can you throw in a clock multiplier? |
|
bahm
Full Member
Posts: 154
|
Post by bahm on May 7, 2019 18:30:12 GMT
I tried to find other factors with sense but didn't find any. What I found is this: oeis.org
A wiki about integer sequences. This world is crazy. |
|
pol
Wiki Editors
Posts: 1,277
|
Post by pol on May 8, 2019 16:01:43 GMT
Oh God, another order. How do I keep this one quiet from the Mrs....
|
|
|
|
Post by NightMachines on May 10, 2019 23:25:58 GMT
I filmed three quick sound demos of the module prototypes today at Superbooth 2019:
SOLINA STRING MACHINE:
KICK & DRUMKIT 010, triggered by TOPOGRAF (MI Grids):
ALGODRONE:
Fun tip: Play the three videos together all at once ;-)
|
|
|
|
Post by fugubot on May 10, 2019 23:40:02 GMT
Thanks. I was dying to hear the modules. The Solina sounds much better than the samples from the module that inspired it. Great rich sound.
|
|
|
|
Post by moruial on May 11, 2019 8:01:28 GMT
The SOLINA sound so ethereal... it is simply amazing to my ears. I definetly must get to know more about this little beauty. KICK and TOPOGRAF are veeery appealing also, and they might end up in a future case, as I'm currently searching for drumachine. As of the DRUM010 and the Algodrone they didn't pick that much of my interest at the moment. As fun as they sound, I don't seen them in how I'd like to proceed, musicaly/creatively speaking. But who knows! 1 week ago I didn't know how to use VCAs, and now I think I'll need more... 
Thank you for the quick videos NightMachines I was so impatient to know more about them. |
|
|
|
Post by NightMachines on May 11, 2019 10:24:34 GMT
As of the DRUM010 and the Algodrone they didn't pick that much of my interest at the moment. As fun as they sound, I don't seen them in how I'd like to proceed, musicaly/creatively speaking. Yeah, the Algodrone is really weird and something one might need to explore for a while. I does create nice CV signals too though, for chaotic (i.e. not totally random, but wild) modulation. Also, with CV and 1V/Oct pitched play, I think it will be a fun chiptune oscillator. We'll see. The Drumkit 010 might undergo some changes until it's released, as far as I've heard. It's great to add some little percussion bits to your patch quickly and easily. |
|
|
|
Post by arti on May 11, 2019 11:16:11 GMT
Wow NightMachines thank You! I was hoping to find some info on Youtube or Twitter among superbooth videos and here it is . Solina is VERY temping. To the point when having just one slot left I think if to remove one of the modules (untill I'll buy new case) to make room for Solina Drum combo sounds realy good. I have two drum machines (Volca Kick and Beats) and don't realy need it but I like the sound of it and like the idea of patching my drums, so probably will buy those too eventualy. I think they make more sense together as a combo drum machine than separately, at least for me. Algodrone is weird! Not so musical even, but still tempting. I would love to try to tame it and find a way to include it's freaky sounds into my musical fabric. I think it would be very enriching to have it onboard. This solves my concerns about which case should I get after filling my first 2 rack - another 2 rack of course  to have room for all those goodies. |
|
|
|
Post by readydot on May 11, 2019 17:06:10 GMT
I f***ing love the Solina module. I’ll buy 4 for some mad drones. Just wondering what will be CV controllable, as the prototype seems to lack a bit on that side. It would also be interesting to have an LFO out for example. Just chipping in as TTNM suggested it when I replied to his video on YT.
|
|
Wow!
to have room for all those goodies.